Login:
Votes - 4, Average rating: 3.3 ( )

User manual Tripp Lite, model 95900

Manafacture: Tripp Lite
File size: 43.96 kb
File name: 04-0233d.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


page 6 Verify Windows 98SE/ME Installation ..............page 6-7 Windows NT 4.0 ....................................................... page 7 Verify Windows NT 4.0 Installation ...................... page 8 Windows 2000 ........................................................... page 8 Windows XP/Server 2003 ....................................... page 9 Verify Windows 2000/XP/2003 Installation ...... page 10 Bios Configuration..................................................page 10 Windows 98SE Windows 98SE 1. Install the board and follow Microsoft procedures to install Windows 98SE accordingly. 2. Once Windows has been installed, right click My Computer and click Properties. Select Device Manager tab. 3. Double click PCI Mass Storage Controller listed under Other Devices. 4. Select Driver tab, then click Update Driver button. 5. Insert the driver diskette and click Next. 6. Select Search for a better driver ... and click Next. 7. Check Floppy disk drives, uncheck the other boxes, then click Next. Click Next again, then Finish. 8. Remove the driver diskette and restart Windows to complete driver installation. For Existing Windows 98SE Installation 1. Install the board and boot up Windows 98SE. 2. At the Add New Hardware Wizard, click Next. 3. Select Search for the best driver for your device and click Next. 4. Insert the driver diskette, check Floppy disk drives, uncheck the other boxes, then click Next. 5. Click Next, then Finish. 6. Remove the driver diskette and restart Windows to complete driver installation. Windows ME Windows ME 1. Install the board and follow Microsoft procedures to install Windows ME accordingly. 2. Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab. 3. Double click PCI Mass Storage Controller listed under Other Devices. 4. Select Driver tab, then click Update Driver button. 5. Insert the driver diskette, select Automatic search for a better driver (Recommended), then click Next. 6. Click Finish, remove the driver diskette and click Yes to restart Windows to complete driver installation. For Existing Windows ME Installation 1. Install the board and boot up Windows ME. 2. At the Add New Hardware Wizard, insert the driver diskette. 3. Select Automatic search for a better driver (Recommended), then click Next. 4. Click Finish. 5. Remove the driver diskette and restart Windows to complete driver installation. To Verify Windows 98SE/ME Installation 1. Right-click My Computer, then click Properties. Select Device Manager tab. 2. Double click SCSI Controllers, an entry, Silicon Image SiI 0680 ATA/133 Controller should be listed. 3. Highlight Silicon Image SiI 0680 ATA/133 Controller and click Properties. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed. If any error message is displayed, remove Silicon Image SiI 0680 ATA/133 Controller and restart your system. Windows NT 4.0 For New Windows NT 4.0 Installa...

Other models in this manual:
Computer Accessories - 93900 (43.96 kb)
Computer Accessories - 93900 (43.96 kb)
Computer Accessories - 96500 (43.96 kb)
Computer Accessories - 96900 (43.96 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category