Login:
Sorted: Name ↓   Downloads   Rate   Size ↑  
downloaded: 0   File size: 311 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

Part No. No. DESCRIPTION 1 7 2 5 21 8 Filter Housing & Ring Assembly 2 Cover, Filter 8211528 Pearl Metallic 8212154 Nickel Pearl W10191127 Onyx Black 3 8211520 Guide, Water 4 8211530 Cover, Water Guide 5 Cover, Top 8211529 Pearl Metallic 8212155 Nickel Pearl W10191126 Onyx Black 6 8211746 Seal, Water Reservoir 7 8211531 Cover, Water Reservoir 8 8211533 Water Reservoir 9 Holder, Water Reservoir 8211534 Pearl Metallic 8212156 Nickel Pearl W10191123 Onyx Black 10 821

downloaded: 9   File size: 405 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

Your milk froths up. STEAM INTAKE When the required amount of froth has been attained push selector key anew. COFFEE READY E 11 With the flow-adjustment you can set the optimum frothing. Turn the handle slightly to the right or to the left until you obtain the required result. 11.3 Drawing off hot milk using the Auto-Cappuccinatore S9 The Auto-Cappuccinatore of the S9 can be used to draw off hot milk. Adjust the selector lever (1) (Fig. 10) to position (3) to draw off hot milk. Install the Au

downloaded: 0   File size: 310 kb   Manafacture: Jura Capresso  
Category: Coffee Makers

downloaded: 4   File size: 276 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

• Once you have enough hot water in your cup push the Hot Water Button again. The display shows CONFIRMED 4. COFFEE READY 26. PROGRAMMING / MAINTENANCE The Z5 provides programming, maintenance and look-up functions. With the display at COFFEE READY you can access these functions as follows: • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. The Z5 offers the following Functions (see adjacent chart) Turn the dial clockwise slowly to scroll through Functions. Pleas

downloaded: 54   File size: 291 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

ENA 5 only: When using two cups, make sure the coffee spout is turned to the 2-cup position (Fig. 10). 9d. OVERRIDING CUP SIZE AND COFFEE STRENGTH If you want to brew a different cup of coffee just once you can override the propgrammed strength and volume before brewing. This is convenient when you desire a stronger or milder cup of coffee or a guest wants the coffee prepared differently. • Turn the Rotary Dial. It will show you the following options: MILD, NORMAL, STRONG, STEAM, 2 CUPS. If you

downloaded: 0   File size: 475 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

The IMPRESSA recognizes when you should run a decalcifying cycle. The machine will still make coffee, hot water and steam. However, we recommend that you should decalcify the machine (see Chapter 16) within the next few days. SELECT PRODUCT / DE-SCALE MACHINE After a while the display will change. You should run the decalcifying cycle now (see Chapter 16). SELECT PRODUCT / DE-SCALE NOW 15.10 Emptying the system Requirements: The IMPRESSA has been switched off with the ON / OFF key (11), but the

downloaded: 2   File size: 709 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

62515 03/01 The Impressa E30 is identical in construction and engineering with the Impressa E50/E55 mentioned in the operating instructions. Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet Kundendienst Telefon 062 389 82 33 Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2 Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2 Instructions for use Jura Impressa E50/E55 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 7 8 9 10 11 12 13 14 15 16 17 6

downloaded: 2   File size: 363 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

Never put more than 2 portions of coffee in. The filler funnel is not a storage container. Make sure that the coffee powder which you use is not ground too finely. This can lead to blockages, and the coffee then only runs through drip by drip. If draw-off key is pressed by mistake, the selection can be cancelled by pressing thee selection can be cancelled by pressing the rinsing key . Your machine rinses. After drawing off powder coffee, we recommend that you regularly clean the filler funnel wi

downloaded: 11   File size: 363 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

In just one brewing process, it can prepare 1 or 2 cups of excellent, professional-quality espresso/coffee with guaranteed froth. The unique Jura pre-brew system (Intelligent Pre Brew Aroma System/I.P.B.A.S©) ensures full use of the coffee aroma. The machine works fully automatically at the push of a button. With the coffee aroma, you have the choice between normal, strong and extra strong, depending on taste. The integrated grinder grinds the beans to the required fineness. A separate filler fu

downloaded: 5   File size: 291 kb   Manafacture: Jura Capresso  
Category: Coffee Makers
@name

HIGH, strength (flavor) STRONG ADJUSTABLE SETTINGS 1 cup from 0.5 to 8 oz. 2 cups from 0.5 to 8 oz. per cup Note: when using the 2-cup option, ENA will always grind in the STRONG setting. Please note: You can change all above pre-sets (chapter 14a). You can also override the strengths and the cup size before/ during actual brewing. Overriding will not change the preset values (chapter 9d). Other functions are set as follows (to change functions refer to listed chapters.) chapter Filter (Clearyl)





Category