Votes - 2, Average rating: 4.5 ( )

Manafacture: Bloomfield File size: 1.86 mb File name: Language of manual:

6 OPERATION (continued) WARNING: Burn Hazard. This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from contact with dispensed liquids. CAUTION: Burn Hazard To avoid splashing or overflowing hot liquids, ALWAYS use an empty decanter before starting the brew cycle. Failure to comply can cause serious burns. CAUTION: Burn Hazard After a brew cycle, brew chamber contents are HOT. Remove the brew chamber and dispose of used filter and grounds with care. Failure to comply can cause serious burns. CAUTION: Burn Hazard Exposed surfaces of the appliance, as well as brew chamber and decanter may be HOT to the touch, and can cause serious burns. 1. Remove the brew chamber from under the spray head. Place one (1) genuine Bloomfield paper filter into the brew chamber. Add your choice of pre-measured ground coffee. Shake the brew chamber gently to level the coffee. Slide the brew chamber back into place. 2. Place an empty decanter under the brew chamber. 3. To begin the brew cycle, press BREW key. Hot water will start spraying over the coffee, and brewed coffee will start filling the decanter. When the coffee stops flowing from the brew chamber, the fresh coffee is ready to serve. NOTE: Brewing will not begin until the Precise Temperature for Brewing™ has been reached. (See page 6) 4. At the end of the brew cycle, the view screen will read “Brew complete”. After all dripping has stopped, remove the brew chamber from the brewer. Discard the used paper filter and product. 5. The brewer is now be ready to begin another brewing cycle. USER’S GUIDE PAPER FILTER BREW CHAMBER Brew complete 7 OPERATION (continued) WARNING: Burn Hazard. This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from contact with dispensed liquids. CAUTION: Burn Hazard To avoid splashing or overflowing hot liquids, ALWAYS use an empty decanter before starting the brew cycle. Failure to comply can cause serious burns. CAUTION: Burn Hazard After a brew cycle, brew chamber contents are HOT. Remove the brew chamber and dispose of used filter and grounds with care. Failure to comply can cause serious burns. CAUTION: Burn Hazard Exposed surfaces of the appliance, as well as brew chamber and decanter may be HOT to the touch, and can cause serious burns. 1. Remove the brew chamber from under the spray head. Place one (1) genuine Bloomfield paper filter into the brew chamber. Add your choice of pre-measured ground coffee. Shake the brew chamber gently to level the coffee. Slide the brew chamber back into place. 2. Place an empty decanter under the brew chamber. 3. To begin the brew cycle, press BREW key. Hot water will start spraying over the coffee, and brewed coffee will start filling the decanter. When the coffee stops flowing from the brew chamber, the fresh coffee is ready to serve. NOTE: Brewing will not begin until the Precise Temperature for Brewing™ has been reached. (See page 6) 4. At the end of the brew cycle, the view screen will read “Brew complete”. After all dripping has stopped, remove the brew chamber from the brewer. Discard the used paper filter and product. 5. The brewer is now be ready to begin another brewing cycle. USER’S GUIDE PAPER FILTER BREW CHAMBER Brew complete 7 OPERATION (continued) PROGRAMMING FEATURES AND OPTIONS 1. View Water Temperature in Tank: To view the water temperature on the screen, the E-Max™ brewer must be ON, and not brewing or in the filling mode. Press and hold the 4th key, and depress the 6th key. The actual water temperature will be displayed for 3 seconds. 2. Daily Brew Count: The E-Max™ maintains a count of the number of completed brews for a 7-day period. To access the count, turn the brewer OFF. In the OFF mode, press and hold the CANCEL key for 3 seconds. The current day and brew count will be displayed. Depress the ON/OFF key repeatedly to view each preceding day. When all 7 days have been displayed a 7-day total will be displayed. If you wish to exit the daily brew count before viewing all of the days, press CANCEL key. 3. ON/OFF – Non Automatic Timer: To turn the brewer OFF, press the ON/OFF switch: 2 beeps will be heard and the brewer will be turned OFF, indicated by all lights being off, (including any warmer plates on decanter brewers). To turn the brewer ON, press the ON/OFF switch: 2 beeps will sound, all lights will flash once, then the “Power” light will remain on, (the “Heat” light may come on if water temperature is too low). 4. ON/OFF – Automatic Timer Feature: The factory programmed E-Max™ has the automatic timer turned off. To set the automatic timer, refer to the E-Max™ Programming Manual, “Time Functions” Menu. If the Automatic Timer feature is programmed off, the brewer can be turned on and off by depressing the ON/OFF switch, as noted above. * When the Automatic Timer feature is programmed ON, the E-Max will turn on and off automatically, at a programmed time, Monday to Friday; with a separate on and off programmed time ...

Download now

Please, enter two numbers from picture: