Votes - 3, Average rating: 4.3 ( )

Manafacture: Hearth and Home Technologies File size: 2.1 mb File name: a38de884-4c39-4dd7-b3d0-d2db90a396ab.pdf Language of manual:

• Keep remote controls out of reach of children. • Never leave children alone near a hot fireplace, whether operating or cooling down. • Teach children to NEVER touch the fireplace. • Consider not using the fireplace when children will be present. Contact your dealer for more information, or visit: hpba.org/staysafe. To prevent unintended operation when not using your fireplace for an extended period of time (summer months, vacation, trips, etc): • Remove batteries from remote controls. • Turn off wall controls. • Unplug 3 volt adapter plug and remove batteries on IPI models. • Turn off gas controls valve on standing pilot models. When lighting the pilot light on fireplaces with a standing pilot, remove the fixed glass assembly so you can detect presence of residual gas build-up. See Standing Pilot Lighting instructions and Maintenance Tasks. B. Your Fireplace WARNING! DO NOT operate fireplace before reading and understanding operating instructions. Failure to operate fireplace according to operating instructions could cause fire or injury. Heat & Glo • 6000GBV, 6000GBV-IPI • 2104-900 Rev. H • 11/088 Figure 2.1 General Operating Parts OUTSIDE AIR CONTROL (NOT SHOWN) SECTION 2.H. DECORATIVE DOORS (NOT SHOWN) SECTION 2.E. FIXED GLASS ASSEMBLY (NOT SHOWN) SECTION 14.G. MANTEL HEARTH CLEAR SPACE SECTION 2.D. Heat & Glo • 6000GBV, 6000GBV-IPI • 2104-900 Rev. H • 11/08 9 D. Clear Space WARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. Figure 2.2 Clear Space H. Outside Air (optional) The outside air kit supplies some fresh combustion air for your fi replace. It may help reduce the effects of negative air pressure. (See Section 9.A.) • Refer to Figure 9.2 for location of control. • Close the inlet to prevent cold drafts when the fi replace is not being used. CAUTION! Risk of Burns! The outside air control handle is HOT when fi replace is in operation. Adjust BEFORE lighting fi re. F. Fixed Glass Assembly See Section 14.G. E. Decorative Doors and Fronts WARNING! Risk of Fire! Install ONLY doors or fronts approved by Hearth & Home Technologies. Unapproved doors or fronts may cause fi replace to overheat. This fireplace has been supplied with an integral barrier to prevent direct contact with the fi xed glass panel. DO NOT operate the fi replace with the barrier removed. Contact your dealer or Hearth & Home Technologies if the barrier is not present or help is needed to properly install one. For more information refer to the instructions supplied with your decorative door or front. G. Remote Controls, Wall Controls and Wall Switches Follow the instructions supplied with the control installed to operate your fi replace: CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE I. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a qualifi ed service technician: • Verify all shipping materials have been removed from inside and/or underneath the fi rebox. • Review proper placement of logs, ember material and/or other decorative materials. • Check the wiring. • Check the air shutter adjustment. • Ensure that there are no gas leaks. • Ensure that the glass is sealed and in the proper position and that the integral barrier is in place. WARNING! Risk of Fire/Asphyxiation! DO NOT operate fi replace with fi xed glass assembly removed. Determine if this fi replace has a standing pilot or an Intellifi re ignition system. Ask your dealer or open control access panel, look at gas valve assembly. • A standing pilot ignition will have a red or black ignitor button (refer to Figure 2.3). • An Intellifi re ignition system will not have a button. Figure 2.3 Ignitor Button For safety: • Install a switch lock or a wall/remote control with child protection lockout feature. • Keep remote controls out of reach of children. See your dealer if you have questions. C. Fan Kit (optional) If desired, a fan kit may be added. Contact your dealer to order the correct fan kit. RED OR BLACK BUTTON J. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. When using batteries, unplug the transformer. To prolong battery life, remove them when using the transformer. FOR YOUR SAFETY READ BEFORE LIGHTING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life. A. This appliance is equipped with an intermittent pilot ignition (IPI) device which automatically lights the burner. DO NOT try to light the burner by hand. B. BEFORE LIGHTING, smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor. WHAT TO DO IF YOU SMELL GAS • DO NOT try to light any appliance. • DO NOT touch any electric switch; do not use any phone in your building. DO NOT...

Download now

Please, enter two numbers from picture: