Votes - 3, Average rating: 4.7 ( )

Manafacture: Napoleon Fireplaces File size: 4.4 mb File name: Language of manual:

Closingitwhennotinusewillprevent outside cold air from entering the dwelling. Outside Air Control Lever Air Shutter in Closed Position Outside Air Control Lever Securing ScrewFigure9 Figure10Outside Air Control Lever and Securing Screw Location on Left Side of Cabinet in Lower Control Compartment Area Outside Air Control Lever Outside Air Control Lever Securing Screw Removed Air Shutter in Open Position Front Glass Enclosure Panel, Removal and Installation WARNING Donotoperateappliancewiththe glass front removed, cracked or broken. Replacementoftheglass should be done by a licensed or qualified service technician. WARNING Do not attempt to substitute the materials used on this door, or replace cracked or broken glass with any materials other than those provided by the appliance manufacturer. WARNING Handle this glass with extreme care! Tempered glassissusceptible to damage do not scratch or handle roughly while rein stalling the glass door frame. WARNING Do not attempt to touch the front enclosure glass with your hands while the fireplace is in use. WARNING The glass door must only be replacedasacompleteunitasprovided by the manufacturer. Do not attempttoreplacebroken,cracked or chipped glass separately. WARNING This appliance may only be fitted with doors certified for use with the appliance. AVERTISSEMENT Pour utilisation uniquement avec les portes en verre certifiees avec l'appareil. These are B-Vent appliances. They are designed to operate only when the front glass enclosure panel is installed. Generally the front glass enclosurepanelshouldnotberemovedexceptto gainaccesstothecomponentswithinthefirebox, and the appliance may only be operated without the front glass enclosure panel in place for very brief periods of time during appliance checkout and adjustment. Note: The flame appearance will be diminished and appear smaller than normal while the front glass enclosure panel is removed. During this appliance checkout and adjustment period, a potential safety hazard exists -EXERCISE EXTREME CAUTION to prevent the occurrence of any burn injuries from the exposed flames or hot surfaces. Figure 11-INSTALLING GLASS DOOR Top Flange on Glass Door Bottom Vee-flange Glass Door Glass Door Latch Glass Door Firebox Floor NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Removing Glass Enclosure Panel (see Figure 11) 1. Remove top louver assembly by pulling it up and out. 2. Remove the control compartment access door (see removal instructions on Page 4 -Removing Control Compartment Door). 3. Locate the two (2) latches at the top of the control compartment. To disengage the two latches from the bottom vee-flange of the glass enclosure panel, reach for the handles located towards the back of the latches and pull the handles down toward the front of the appliance. 4. Swing the bottom of the door out and raise it slightly to lift the top flange of the door frame away from the appliance. Installing Glass Enclosure Panel (see Figure 11 ) 1. Visually inspect the ga...

Download now

Please, enter two numbers from picture: