Votes - 3, Average rating: 4 ( )

Manafacture: Lennox International Inc. File size: 2.39 mb File name: Language of manual:

Do not use these appliances if any part has been under water. Immediately call a qualifi ed, professional service technician to inspect the appliance and to replace any parts of the control system and any gas control which have been under water. Ne pas utiliser cet appareil s’il a ete plonge, meme partiellement, dans l’eau. Appeler un technicien qualifi e pour inspecter l’appareil et remplacer toute partie du systeme de commande et toute commande qui a ete plongee dans l’eau. Only trim kit(s) supplied by the manufacturer shall be used in the installation of this appliance. Seules les trousses de garniture fournies par le fabricant doivent etre utilisees pour l’installation de cet appareil. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. These appliances comply with National Safety Standards and are tested and listed by OMNI-Test Laboratories, Inc. (Report No. 116-F-36d-5) to ANSI Z21.50b-2009 (in Canada, CSA 2.22b-2009), and CAN/CGA2.17- M91 (R2009) in both USA and Canada, as vented gas fi replaces. Both millivolt and electronic versions of these appliances may be used in bedrooms only when the room is an "unconfi ned space" as defi ned by the National Fuel Gas Code. Use in bedrooms may not be allowed by your local building codes. You should obtain prior approval from the Authority having jurisdiction prior to installation. MISC. CODES / STANDARDS The Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 / NFPA 54—latest edition (In Canada, the current CAN/CGA-B149.1 installation code).The appliance, when installed, must be electrically grounded and wired in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70—latest edition, or the Canadian Electrical Code, CSA C22.1—latest edition. Provide adequate clearances around air openings and adequate accessibility clearance for service and proper operation. Never obstruct the front or back openings of the appliance. These appliances are designed to operate on natural or propane gas only. The use of other fuels or combination of fuels will degrade the performance of this system and may be dangerous. These fi replaces are designed as decorative appliances and are not intended for use as area heaters. They must not be equipped with wall thermostats or remote controls with thermostat functions. OUTSIDE COMBUSTION AIR HOOK UP These appliances are equipped with an integral combustion air door and actuator arm. Combustion air kits are optional. Install as shown in Step 7 on Page 13. These appliances must not be connected to a chimney or fl ue serving a separate solid fuel burning appliance. Both millivolt and electronic systems can be operated during a power outage, and feature manually operated hi-low fl ame control. The BTU Input for these appliances is shown in Table 1. Natural Gas Propane Gas Model Input Rate Input Rate (BTU/HR) BTU/HR) MPB33 13,500 to 13,500 to 17,500 17,500 MPB35 ...

Download now

Please, enter two numbers from picture: