Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 14   File size: 628 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

Keep the supply cord away from the front of the heater. General Unpack the heater carefully and retain the packaging for possible future use, in the event of moving or returning the fire to your supplier. Loose coals and pebbles are packed separately within the carton. When the heater is assembled the coals or pebbles are placed on top of the fuel bed up to a maximum weight of 6kg. The fire incorporates a flame effect, which can be used with or without heating, so that the comforting effect may

downloaded: 2   File size: 293 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

5). ‘OFF’ Position Set the timer switch to position. The timer operates but the heater will not output any heat, as the electricity supply to the heating elements has been disconnected. Manual Operation Set the timer switch to position. The heater will now operate continuously under the control of the thermostat - see ‘Thermostat Operation’ above. Fig. 5 Automatic Operation Set the timer switch to position. The panel will now operate during set ‘ON’ periods under the control of the thermostat. T

downloaded: 0   File size: 485 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

a. Avoid structures liable to vibration, e.g. crane gantries, which could otherwise adversely affect lamp life. b. The lamps are designed to operate within 5° of the horizontal plane. It is very important to ensure that the heater is mounted horizontally, otherwise the operating life of the lamp could be impaired. c. Ensure appliance is mounted the correct way up so that it can be tilted down but not up. d. WARNING – THESE HEATERS ARE DESIGNED TO BE WALL MOUNTED, BRACKET MOUNTED, OR SUSPENDED MO

downloaded: 4   File size: 485 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

Ensure that the heater is not used in close proximity to the skin or eyes. Always isolate the heater from the supply before undertaking any maintenance work of the appliance. The Vector VR15 model is designed for internal use only, whilst the VR20RP Patio Vector model can be internally or externally installed. Both heaters are not rated as flame-proof and must not be used when flammable dusts, gases, or vapours, etc., are likely to be present in the atmosphere. If in doubt, advice should be soug

downloaded: 0   File size: 236 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

• •••••Do not locate the heater immediately below a fixed socket outlet or connection box. • •••••Do not cover the heater. Do not place material or garments on the heater, or obstruct the air circulation around the heater, for instance by curtains or furniture, as this could cause overheating and a fire risk. • •••••Do not leave young children or the infirm unsupervised in the vicinity of the heater. • •••••Do not use this heater in series with a thermal control, a program controller, a timer or

downloaded: 0   File size: 69 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

User Note: These instructions give important advice on how to get the best out of your new heater. Please read them carefully and keep them in a safe place for future reference. After Sales Service: Your product is guaranteed for one year from the date of purchase. We undertake to repair or exchange this product free of charge within this period providing the product has been installed and operated in accordance with the manufacturers instructions. Should you require after sales service, please

downloaded: 0   File size: 69 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

NOTE ALSO THE INFORMATION GIVEN ON THE HEATER • WARNING - THE SURFACES ON THIS HEATER CAN BE HOT. • This heater meets BS 3456 safety requirements. However, any heater type becomes hot in normal operation. Care must be taken to ensure that prolonged skin contact with the heater does not occur. WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE LIKELY TO BE LEFT UNSUPERVISED IN THE VICINITY OF THE HEATER WE RECOMMEND THAT A GUARD IS FITTED. Contact your installer or the manufacturer for further

downloaded: 5   File size: 69 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

In addition ensure the input is set at MAX. MAINTENANCE MAINTENANCE ROOM ENVIRONMENTAL CONTROLS The installation may be fitted with several additional environmental controls. A room thermostat may be fitted in the room. This thermostat controls the operation of the heater fan. Adjust the setting until a comfortable environment is achieved. Note however the higher the thermostat setting the higher the running costs. Where duct work is installed individual rooms will be fitted with supply air regi

downloaded: 0   File size: 69 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

Turning the knob clockwise increases the amount of heat stored. The setting should be adjusted from MIN to MAX to suit seasonal requirements. 2. NEON INDICATOR & 3. FAN SWITCH To obtain heat from the Electricaire Unit press the fan switch to the ON position. The fan indicator light will now glow red. If the fan is controlled by a room thermostat it will switch off automatically when the room temperature reaches the required level. The fan should be switched off before retiring at night. This fun

downloaded: 4   File size: 69 kb   Manafacture: Dimplex  
Category: Electric Heaters
@name

• This heater meets BS 3456 safety requirements. However, any heater type becomes hot in normal operation. Care must be taken to ensure that prolonged skin contact with the heater does not occur. WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE LIKELY TO BE LEFT UNSUPERVISED IN THE VICINITY OF THE HEATER WE RECOMMEND THAT A GUARD IS FITTED. Contact your installer or the manufacturer for further advice. • THIS APPLIANCE IS EXTREMELY HEAVY. THE FLOOR MUST BE CHECKED TO ENSURE THAT IT IS CAPAB





Category