The end of the flue pipe must line up Page 8 LA30iB 3.99 Central Heating Flow Central Heating Return Drain Cock at Lowest Point Drain Cock Indirect Hot Water Cylinder Cold Water Tank Overflow Feed and Expansion Tank 22mm Open Vents Gravity Radiator Circulating Pump Central Heating Return Drain Cock at Lowest Point Drain Cock Indirect Hot Water Cylinder Domestic Hot Water Draw Off Cold Water Tank Overflow Overflow Feed and Expansion Tank 22mm Open Vents Gravity Radiator Circulating Pump Injector

The fire should be riddled with the doors shut (see Fig 2.) Place the tool onto the riddler rod and rotate between the ‘3 o’clock’ and ‘5 o’clock positions several times. Too much riddling can result in emptying unburnt fuel into the ashpan and should therefore be avoided. Clinker should regularly be removed from the firebed. After riddling, the grate should be put back into the solid fuel or wood position as required (the tool should be horizontal for solid fuel or vertical for wood). REFUELLIN

It may be fully opened when rapid heating is required or to help clean any deposits from the glass. It will not be possible to keep the glass clean if this control is fully closed, particularly immediately after refuelling. RIDDLING When burning solid fuels riddling twicea day is usually sufficient. When burning wood or peat, ash should be allowed to build up and generally weekly riddling will be sufficient. The fire should be riddled with the doors shut (see Fig 2.) Place the tool onto the ridd

The following points should be noted and with a little care should enable the glass to be kept clean in most situations: a) The airwash relies on a supply of heated air to keep the glass clean, therefore, when lighting the stove allow the firebed to become well established before closing the airslides. This may also be necessary when re-fuelling the stove. b) When re-fuelling keep the fuel as far back from the front firebars as possible, do not try to fit too much fuel into the firebox. c) Never