Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 61   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

140: Opens an IO path for sending binary data to the signal generator. 150: Creates an ASCII string representation of the number of bytes in the waveform. 160 to 170: Finds the number of digits in Nbytes. 190: Sends the first part of the SCPI command, MEM:DATA along with the name of the file, data_file, that will receive the waveform data. The name, data_file, will appear in the signal generator’s memory catalog. 200 to 210: Sends the rest of the ASCII header. 230: Sends the binary data. Note th

downloaded: 11   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

Queries: STATus:QUEStionable:BERT:NTRansition? STATus:QUEStionable:BERT:PTRansition? Data Questionable BERT Event Register The Data Questionable BERT Event Register latches transition events from the condition register as specified by the transition filters. Event registers are destructive read-only. Reading data from an event register clears the content of that register. Query: STATus:QUEStionable:BERT[:EVENt]? Data Questionable BERT Event Enable Register The Data Questionable BERT Event Enable

downloaded: 6   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

Before running the program: • Connect the output of a modulating signal source to the signal generator’s EXT 2 input connector. • Set the modulation signal source for the desired FM characteristics. Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide Programming Examples GPIB Programming Interface Examples Launch Microsoft Visual C++ 6.0, add the required files, and enter the code into your .cpp source file. visaex5.cpp performs the following functions: •error checking

downloaded: 86   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

Compare the print date of this guide (see bottom of page) with the latestrevision, which can be downloaded from the following websites: Manufacturing Part Number: E8251-90355 Printed in USA February 2008 © Copyright 2006-2008 Agilent Technologies, Inc. Notice The material contained in this document is provided “as is”, and is subject to being changed, without notice, in future editions. Further, to the maximum extent permitted by applicable law, Agilent disclaims all warranties, either express o

downloaded: 9   File size: 3 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

The EXT indicator is activated in the AMPLITUDE area of the display. NOTE For signal generators with Option 1E1, notice that the ATTN HOLD (attenuator hold) annunciator is displayed. During external leveling, the signal generator automatically uncouples the attenuator from the ALC system for all external leveling points. While in this mode, the RF output amplitude adjustment is limited to -20 to +25 dBm, the adjustment range of the ALC circuitry. For more information, see “External Leveling wit

downloaded: 2   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

Use a Root Nyquist filter when you want to place half of the filtering in the transmitter and the other half in the receiver. The ideal root-raised cosine filter frequency response has unity gain at low frequencies, the square root of raised cosine function in the middle, and total attenuation at high frequencies. The width of the middle frequencies is defined by the roll off factor or Filter Alpha (0 < Filter Alpha < 1). • Nyquist is a raised cosine pre-modulation FIR filter. You can use a Nyqu

downloaded: 86   File size: 196 kb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 3. Operation Verification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Performing a Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Self-Test Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

downloaded: 140   File size: 3 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

The RF output changes to the frequency value of the table row containing the cursor and 1.000 000 000 00 is displayed in the AMPLITUDE area of the display. 2. Observe and record the measured value from the power meter. 3. Subtract the measured value from 0 dBm. 4. Move the table cursor over the correction value in row 1. 5. Press Edit Item > enter the difference value from step 3 > dB. The signal generator adjusts the RF output amplitude based on the correction value entered. 6. Repeat ste

downloaded: 2   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

Chapter 2 Basic Operation Configuring the RF Output Configuring a Ramp Sweep for a Master/Slave Setup This procedure shows you how to configure two PSGs and an 8757D to work in a master/slave setup. 1. Set up the equipment as shown in Figure 2-7. Use a 9-pin, D-subminiature, male RS-232 cable with the pin configuration shown in Figure 2-8 on page 46 to connect the auxiliary interfaces of the two PSGs. You can also order the cable (part number 8120-8806) from Agilent Technologies. By connecting t

downloaded: 52   File size: 2 mb   Manafacture: Agilent Technologies  
Category: Portable Generators
@name

Differential data encoding can be described by the following equation: transmittedbit i()= databit i( –1).databit i() For a bit-by-bit illustration of the encoding process, see the following illustration: 0 101 00 1 100 101 raw (unencoded) data change = no change = 1111010101111 differentially encoded data 162 Chapter 7 Custom Real Time I/Q Baseband Working with Differential Data Encoding How Differential Encoding Works Differential encoding employs offsets in the symbol table to encode user-def





Category