Votes - , Average rating:
(
)
)
Manafacture: Philips
File size: 1.79 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
Other manuals for this model:
Portable Generators - SCD525/00 (282.58 kb)
Portable Generators - SCD525/00 (332.61 kb)
manual abstract
Why do the non-rechargeable batteries of the
Why is the connection lost every now and then?
baby unit run low quickly?
Why are there sound interruptions?
• The microphone sensitivity level of the baby
• The baby unit and the parent unit are probably
unit may be set too high, which causes the
close to the outer limits of the operating
baby unit to transmit more often. Decrease the
range. Try a different location or decrease the
microphone sensitivity level in the menu of the
distance between the units. Please note that
parent unit.
it takes about 30 seconds each time before a
• The volume on the baby unit may be set too
connection between the units is established.
high, which causes the baby unit to consume a
• You may have placed the parent unit next to a
lot of energy. Decrease the volume of the baby
transmitter or other DECT appliance, such as
unit.
a DECT telephone or other 1.8Ghz/1.9Ghz
• You may have set a maximum room
baby monitor. Move the parent unit away from
temperature that is lower than the actual room
the other appliances until the connection is
temperature or a minimum room temperature
re-established.
that is higher than the actual room temperature.
The baby unit continues to send data to the
What happens during a power failure?
parent unit and therefore uses more power.This • If the parent unit is sufficiently charged,
causes the non-rechargeable batteries of the
it continues to operate during a power failure,
baby unit to run low quickly.
both inside and outside the charger. If there are
• Perhaps you have switched on the nightlight. If
batteries in the baby unit, it also continues to
you want to use the nightlight, we advise you to
operate during a power failure.
run the baby unit on mains power.
Is my baby monitor secure from eavesdropping
Why does the charging time of the parent unit
and interference?
exceed 8 hours?
• The DECT technology of this baby monitor
• The parent unit may be switched on during
guarantees no interference from other
charging. Switch off the parent unit during charging.
equipment and no eavesdropping.
The specified operating range of the baby
The operating time of the parent unit is
monitor is 330 metres/1000 feet. Why does my
supposed to be up to 24 hours. Why is
baby monitor manage a much smaller distance
the operating time of my parent unit shorter?
than that?
• When the parent unit has been charged for
• The specified range is only valid outdoors in
the first time, the operating time is less than
open air. Inside your house, the operating range
24 hours. The rechargeable batteries only reach
is limited by the number and type of walls and/
their full capacity after you have charged and
or ceilings in between. Inside the house, the
discharged them at least four times.
operating range is up to 50 metres/150 feet.
• The volume of the parent unit may be set too
• The ECO mode is switched on. When you
high, which causes the parent unit to consume
operate the baby unit in ECO mode, the
a lot of energy. Decrease the volume of the
operating range is 260 meters/800 feet in open
parent unit
air. Inside your house, the operating range is
• The microphone sensitivity level of the baby
limited by the number and type of walls and/or
unit may be set too high, which causes the
ceilings in between. Move the parent unit closer
parent unit to consume a lot of energy.
to the baby unit or switch off the ECO mode.
Decrease the microphone sensitivity level in
the menu of the parent unit.
18
...