Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Portable Generators - SCD525/00 (282.58 kb)
Portable Generators - SCD525/00 (332.61 kb)
manual abstract
7.5 Adjusting microphone
4 Press the OK button to confirm.
sensitivity
5 If the alert is off, the display shows ‘On?’. Press
the OK button to switch on the alert. If the
D Note:
alert is on, the display shows ‘Off?’. Press the
E
NGLISH
You can only adjust the microphone sensitivity in
OK button to switch off the alert.
the menu of the parent unit.
• If you have set the sound alert to ‘on’, the
You can set the microphone sensitivity of the
sound alert symbol ( q) appears on the
baby unit to the desired level. You can only change
display of the parent unit.
the microphone sensitivity when a connection
between the baby unit and the parent unit has
7.7 Setting room temperature
been established, i.e. when the LINK light on the
range
parent unit lights up green continuously.
1 Select ‘Sensitivity’ with the + and - buttons.
D Note:
2 Press the OK button to confirm.
You can only adjust the temperature range in the
3 Select the desired microphone sensitivity
menu of the parent unit.
level for the baby unit with the + and -
A baby will sleep comfortably in a room heated
buttons. (Fig. 31)
to a temperature between 16°C and 20°C. This is
1 Minimum sensitivity level
important, since a baby cannot regulate its body
2 Maximum sensitivity level
temperature as well as an adult. A baby needs
4 Press the OK button to confirm.
more time to adjust to temperature changes.
• The message ‘Saved’ appears on the display. If you do not set a temperature range, the baby
monitor alerts you when the temperature in your
D Note:
baby’s room drops below 14°C or rises above
When the microphone sensitivity of the baby unit 35°C. In this case, the backlight of the parent unit
is set to a high level, it picks up more sounds and
display goes on and ‘High’ or ‘Low’ appears on
therefore transmits more often. As a result, the
the display. To change the default minimum and
units consume more power and the operating
maximum temperature, follow the instructions
time of the battery is shorter.
below.
7.6 Sound alert on/off
D Note:
The temperature of the baby’s room is shown
D Note:
on the display of the parent unit when they are
You can only switch the sound alert on and off in
linked.
the menu of the parent unit.
1 Select ‘Temperature’ with the + and - buttons.
This feature allows you to monitor your baby silently. 2 Press the OK button to confirm.
It enables you to switch off the volume on your
3 Select ‘Range’ with the + and - buttons.
parent unit and still be alerted if your baby cries.
4 Press the OK button to confirm.
If the sound alert is switched on, the parent unit
5 Set the desired minimum temperature with
beeps as soon as the fourth sound level light
the + and - buttons.
lights up blue while the volume is switched off. In
6 Press the OK button to confirm.
addition, the backlight of the parent unit display
7 Set the desired maximum temperature with
goes on and the sound alert symbol ( q) flashes
the + and - buttons.
on the display.
8 Press the OK button to confirm.
1 Select ‘Alert settings’ with the + and - buttons.
• The message ‘Saved’ appears on the display.
2 Press the OK button to confirm.
3 Select ‘Sound alert’ with the + and - buttons.
13
...