Votes - , Average rating:
(
)
)
Manafacture: Philips
File size: 1.65 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
9243-ExpressSteriLft_GBEUtxt.qxd 5/6/07 09:40 Page 3
GB
Philips AVENT Express Electric Steam Steriliser
Please take 5 minutes to read through the whole of this
NB: When loading, always ensure that the steam can
leaflet before you use your Philips AVENT Express Electric
effectively circulate around all surfaces and that any
Steam Steriliser for the first time.
water can drain off easily.
As well as bottles and breastfeeding accessories, you
To sterilise up to six 260ml, 125ml or 330ml
can sterilise any other boilable items (please refer to
the manufacturer’s instructions regarding sterilisation).
AVENT Bottles (see diagram C)
Please keep these instructions safe for future use.
1) Slide the lower basket onto the central stem.
These instructions are also available on our website.
2) Thread 2 screw rings onto the central stem.
3) Slide the bottle rack down the central stem, with the
Hazard Warning
neck facing down, until it rests on the top screw ring.
•
When in use, the steriliser contains boiling water
4) Place the teats through the centre of the holes in the
and steam escapes from the vent in the lid.
bottle rack onto the lower basket.
•
Ensure the steriliser is placed on a firm level
5) Thread 4 screw rings onto the central stem.
surface when in use.
6) Place the 6 inverted bottles in the bottle rack.
• Never open the unit when in use.
7) Push the upper basket onto the central stem until it rests
• Always keep out of reach of children.
on the catch. Place the 6 dome caps and tongs into the
• Always unplug from the mains when not in use.
upper basket.
• Never place items on top of the steriliser.
8) The upper basket is not required when sterilising 330ml
• To stop the steriliser during the cycle, unplug at the mains.
bottles (see diagram C8).
• Take care when opening as steam can burn.
9) Place the assembled unit into the steriliser body and put
• Never immerse the steriliser in water.
the lid on.
• Never use the steriliser without water.
10) Put the lead into the back of the steriliser body and plug
•
Failure to follow de-scaling instructions may cause
into the mains supply. Switch on.
irreparable damage.
11) Cycle times will vary depending on the load. After each
• There are no servicable parts inside the Express Electric
cycle the unit will switch off automatically and the light
Steam Steriliser. Do not attempt to open, service or
will go out (approx. cycle time: 8 minutes).
repair the Express Electric Steam Steriliser yourself.
To sterilise the Philips AVENT ISIS Manual Breast
Contents (see diagram A)
Pump (see diagram D)
a) Lid
1) Click the ISIS Breast Pump body into the slot in the upper
b) 2 x Upper basket
basket and arrange the other breast pump components as
c) Bottle rack
shown. Assemble remaining components of the ISIS Breast
d) Lower basket
Pump in the lower basket.
e) Central stem
2) Up to six bottles (not including screw rings, teats or dome
f) Steriliser body
caps) can be sterilised with the pump.
g) Measuring cup
3) Place assembled unit into the steriliser body, put the lid on.
h) Lead and plug
4) Put the lead into the back of the steriliser body and plug
i)
Tongs
into the mains supply. Switch on.
NB: Upper and lower baskets are identical
To sterilise narrow neck bottles and other
Before using your steriliser for the first time
feeding items
(see diagram B)
Teats should be placed around the central stem in the lower
Remove all items from inside the steriliser body.
basket and screw rings in the top basket, as they are too narrow
1) Pour in exactly 90ml of tap water.
for the stem. Always ensure items are positioned within baskets
2) Assemble all the blue components (baskets, stem and bottle
/racks to ensure effective circulation of steam. The bottle rack
rack). Place the assembled components in the steriliser and
and/or upper basket can be removed to make more room.
put the lid on.
3) Connect the lead into the back of the steriliser and plug into
After sterilisation (see diagram E)
the mains supply. The light should come on automatically.
1) Do not remove the lid straight away. Let the steriliser cool
If it does not, press down on the steriliser switch.
down for 3 minutes.
4) At the end of the cycle the unit will switch off automatically
2) Turn off at the mains, unplug and disconnect the lead from
and the light will go out.
the back of the steriliser.
5) Allow unit to cool, turn off at the mains, unplug and
3) Wash your hands thoroughly before removing the
disconnect the lead from the back of the steriliser.
sterilised items.
6) Remove baskets and bottle rack, pour away any remaining
4) Remove the lid.
water and wipe dry.
5) If necessary, shake excess water from items before
assembling.
Before each use
6) The tongs can be used to remove small items and to pull
1) Before sterilising, wash all items in mild soapy water
the sterile teats through the screw rings of the bottles.
and rinse.
7) The contents will remain sterile for up to six hours, following
2) Pour exactly 90ml of water into the steriliser body.
the end of the cycle, provided the lid is not removed.
If you add more than 90ml you will prolong the cycle
time. If you use less than 90ml, your items may not
be properly sterilised.
6
...