2 Installation o General......................................3 >=> Step 1 - Prepare cabinet............................. 4 «=> Step 2 - Prepare cabinet for electrical supply.......... ......5 ■=> Step 3 - Removal of oven & grill doors...................... 5 •=> Step 4 - Connect to electrical supply...................... 6 •=> Step 5 - Secure to cabinet............................ 6 => Step 6 - Before using ..............................7 «=> Step 7 - Testing user functions............

1. This appliance is designed for non-professional, household use. 2. When you have removed the packing, check whether the appliance is intact. If you have any doubts, contact a qualified professional before using the appliance. Never leave the packing components (plastic bags, polystyrene foam, nails, etc.) within the reach of children since these are a source of potential danger. 3. The appliance must only be installed by a qualified person in compliance with the instructions provided by the m

: "Pizza" The heating elements (bottom and circular) are turned on to heat the oven up quickly. Your pizzas and tarts will benefit from a greater amount of heat from below, thus guaranteeing the rapid baking of the dough during cooking. As for the fan, the latter browns the surface as necessary, making the food even more appetising. Use the dripping pan as a dish support and place it on the 1st rack from the oven bottom. We recommend you pre-heat the oven before placing your dishes in it. : "Gri

• the heating elements are no longer powered if an anomaly occurs. Notes: 1-Despite the high temperature inside the oven during the pyrolytic self-cleaning process, the external surfaces of the appliance remain lukewarm, thanks to: • a reinforced insulation of the oven compartment • a fan that ensures the circulation of air to cool down the oven wall panels. 2-When looking through the oven door, you may notice some particles that light up when they are destroyed by pyrolysis upon contact with th

Proceed as follows: • set the mode selector to the selected mode, • set the temperature using the temperature selector knob (in steps of 10° at a time) if the recommended one is not to your liking, The grill display indicates a power level between 1 and 5 (1 for minimum power and 5 for maximum power). • a recommended cooking time is associated with each cooking mode. You may change the recommended cooking time by pressing and keys "+" and/or "-" (cooking time must include approximately 10 minute

Thank you. Close-up View A. Control Panel B. Knob for selecting the cooking features. C. Knob for adjusting the cooking temperature. D. Timer Knob (only on certain models) E. Oven Light (only on certain models) - When the light H is on, it indicates that the oven is heating. It will turn off when the temperature setting has been reached. F. Drip pan G. Oven Racks F H. Guides for sliding the racks or drip pan in and out. E 15 30 45 220 180 140 100 60max B D C A G 15 30 45 220 180 140 100 60max Ho

Close-upView A. Control Panel E'. Knob for selecting the cooking features. Knob for adJusting the cooking temperature. D.Elec{ronicProgramer(onlyon a fe\,v models)-This feature allows youto set the lengthand end cooking timgfrrr any ofthe cookingfeatures.ltalsohas a timer Eature. Dl.TimerKnob(onlyon a few models). E. OvenLlght(onlyoncertain models) -When the light is on, it indicates that the oven is heating. lt will turn off when the temperature setting hasbeen reached. F. Dripplng-pan Oven Rac

Maintenance Inside the oven We recommend you clean your oven each time you use it, especially after cooking roasts. In fact, it is advisable to prevent food residue from building up during cooking: the residue would be re-cooked each time the oven is used and would char and release smoke and unpleasant odours. Oven exterior Clean the enamelled or stainless steel exterior surfaces of your oven using a sponge soaked in soapy water, making sure you rinse and dry these thoroughly, without using abra

2 These instructions are only for those countries whose symbols appear in the booklet and on the serial no. plate of the appliance. 3 This owner’s manual is for a class 1 appliance (insulated) or class 2, subclass 1 appliances (installed between two cabinets. 4 Before using your appliance, read the instructions in this owner’s manual carefully since it provides all the information you need to ensure safe installation, use and maintenance. Always keep this owner’s manual close to hand since you m

N.B.: the following installation procedure must be carried out by a qualified electrician.The electrical installation must comply with the IEE Regulations, Building & local By-Lays. For the installation of the feeding cable carry out the following operations: . Unscrew screw “V” (see fig. A) . Pull and open the junction blok lid Important: the wires in the mains lead are coloured in accordance with the following code: Green & Yellow Earth Blue Neutral Brown Live As the colours of the wires in th