Votes - 2, Average rating: 4
(
)
)
|
manual abstract
42856 & 42857 © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (NOV 2002) CONTENT For detailed description of the DRIVER INSTALLATION with screen shots included please refer to the ENGLISH manual. The description in the german, french and italian manuals are as short guide only. All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders. English Manual 1. Overview Congratulations on your purchase of the USB-Serial adapter. This device provides a simple and easy way to connect Universal Serial Bus (USB) and Serial port interface. With the advantage of USB port, users have the capability to utilize the peripheral with serial port interface in an easy to use environment such as plug and play & hot swap function. This adapter is designed for ideal connections to Cellular Phone, Digital Camera, Modems or ISDN terminal adapter with over 120kbps data transfer rate. The USB-Serial adapter and software drivers are capable of providing a no-firmwarechange feature that enable USB interface to be transparent to serial port peripherals with minimum modifications. 2. Package Content .. Hardware: USB-Serial adapter, USB type A to type B cable .. CD-ROM with USB-Serial drivers and User’s Manuals 3. Product Features .. USB Specification Rev. 1.1 compliant .. Support the RS232 Serial interface .. Over 120kbps data transfer rate .. Support remote wake-up and power management 4. System Requirements PC .. IBM® PC 486DX4-100 MHz CPU or higher or compatible system .. Available USB port .. CD-ROM drive .. Windows® 98, ME, 2000 or XP MAC .. Power G3 OR G4 CPU or I-MAC .. Available USB port .. CD-ROM drive .. Mac OS 8.6 through 9.X 5. Driver Installation 5.1 Windows® 98 Driver Installation Following the steps below to install Windows® 98 driver 5.1.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.1.2 Plug in the USB-Serial adapter into the USB port and run the Add New Hardware Wizard to assist you in setting up the new device. Click “Next” to continue. English Manual 5.1.3 Select “Search for the best driver for your device (Recommended)”, and then click “Next” to continue. 5.1.4 Insert the USB-Serial adapter software driver into the CD-ROM drive and select Specify a location and type the “D:\Driver\USB-SERIAL ADAPTER\Windows” in the dialogue (D: represents CD-ROM) English Manual 5.1.5 Windows® will detect the driver (SERWPL.INF) and shows the Prolific USB-to-Serial Comm Port. Click “Next” to continue installation. 5.1.6 Click Next to continue and let Windows® copy the needed files to your hard disk. 5.1.7 When Windows® finished installing the software, click “Finish”. 5.1.8 After install the driver, you have to check the “Control Panel”-“System”“ Device Manager” to make sure the driver has already installed, you can see a USB to Serial Port (COM3) under the Ports (COM & LPT) and a Prolific USB-to-serial Com Port under the Universal Serial Bus Controller. English Manual 5.2 Windows® 98 Driver Un-installation If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.2.1 Unplug the USB-Serial adapter from your PC. 5.2.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.2.3 Click “Ok” to continue. 5.2.4 After remove the driver, you have to reboot the PC English Manual 5.3 Windows® ME Driver Installation Follow the steps below to install Windows® ME driver 5.3.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.3.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and Plug in the USB-Serial adapter into the USB port; select the Automatic search for a better driver (recommended), and then click “Next” to continue. 5.3.3 Windows® will detect the driver (SERWPL.INF) and show the Prolific USB-to-Serial Comm Port. English Manual 5.3.4 When Windows® finished installing the software, click “Finish”. 5.3.5 After install the driver, you have to check the “Control Panel”-“System”“ Device Manager” to make sure the driver has already installed, you can see a USB to Serial Port (COM3) under the Ports (COM & LPT) and a Prolific USB-to-serial Com Port under the Universal Serial Bus Controller. English Manual 5.4 Windows® ME Driver Un-Installation If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.4.1 Unplug the USB-Serial adapter from your PC. 5.4.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.4.3 Click “Ok” to continue. 5.4.4 After remove the driver, you have to reboot the PC English Manual 5.5 Windows® 2000 Driver Installation Follow the steps below to install Windows® 2000 driver: 5.5.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.5.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and Plug in the USB-Serial...
Other models in this manual:Chippers - 42856 (2.13 mb)