|
manual abstract
5.6.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM. 5.6.3 Click “Ok” to continue. 5.6.4 After remove the driver, you have to reboot the PC English Manual 5.7 Windows® XP Driver Installation Follow the steps below to install Windows® XP driver: 5.7.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.7.2 Insert the driver of USB-Serial adapter into CD-ROM drive and plug in the USB-Serial adapter into the USB port, the “Found New Hardware Wizard” will to assist you to setting up the new device. 5.7.3 Select the “Install the software automatically (Recommended)” then click “Next” to continue. 5.7.4 The windows will auto detect the device (prolific USB-to-Serial Comm Port) and install the driver into your system. 5.7.5 As the windows appear as below, click the “Finish” to continue. English Manual 5.7.6 After install the driver, you can see a new Prolific USB-to-Serial Comm Port (COM3) under the Ports (COM&LPT). English Manual 5.8 Windows® XP Driver Un-Installation If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.8.1 Unplug the USB-Serial adapter from your PC. 5.8.2 Run the D:\Driver\USB-SERIAL ADAPTER\WINDOWS\ Uninstall.exe from the software CD-ROM, and then reboot the PC. 5.8.3 Click “OK” to remove the driver. 5.8.4 After remove the driver click “YES” to reboot your PC. English Manual 5.9 MAC Driver Installation Follow the steps below to install driver of USB-Serial adapter: 5.9.1 Power on your computer and make sure that the USB port is enabled and working properly. 5.9.2 Insert the USB-Serial adapter software driver into the CD-ROM drive and copy the “D:\Driver\USB-SERIAL ADAPTER\MAC\SETUP.SIT” to the desktop from the CD-ROM. 5.9.3 Run the SETUP.SIT from the desktop, it will auto run the program and create a PL-2303G on desktop. 5.9.4 Copy the “PL-2303G” to the “System Folder”-“Extensions”. 5.9.5 To make sure that your computer can use the device correctly, you have to check the “Apple System Profiler”-“Device and Volumes”. It will show the USB Device English Manual 5.10 MAC Driver Un-Installation If you want to remove the USB-Serial adapter driver, you can uninstall it by following the steps below: 5.10.1 Unplug the USB-Serial adapter from your MAC machine. 5.10.2 Remove the “PL-2303G” into the trash and then reboot your MAC machine. 6 Setting Up the RS232 Serial Device Follow the steps below to connect your RS232 Serial Device (i.e.: Modem) to the USB port of your PC: 6.1Turn off your Modem. Plug the DB 9 connector of the USB-Serial adapter into your Modem. Connect the other end of the USB-Serial adapter to an USB type A to type B cable. Turn on the Modem afterwards. 6.2Turn on your computer and plug in the USB connector of the USB-Serial adapter into the USB port. 6.3If you have already installed a Modem device before, click Start, Settings, and Modems. Open Modems Properties, select the Modem, and click Properties. In General tab, please change the Port value to USB to Serial Port (COM3). 6.4After finishing these processes, you can use USB to Serial Bridge Cable to connect RS232 Serial 56K FAX Modem and execute the Dial-up function to connect Internet, and send the FAX with the FAX software (i.e.: Microsoft FAX) properly. English Manual 7 Trouble Shooting If you can successful install the driver but cannot use the USB-Serial Adapter with connect the other device: Go to the Control Panel-System-Device Manager and check the COM (COM&LPT), if you cannot see this item: Please check the BIOS setting > I/O configure setting > Onboard serial port 1, choose the setting is enabled and choose the value. Then return to the windows and check it again. Go to the Control Panel > Add New Hardware, following the step and choose the hardware from the list, select the Ports(COM&LPT) and following the step to install the driver that is needed.(In this process you may need to put the WINDOWS CD into the CD-ROM drive.) 8 Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer. All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders. Deutsches Benutzerhandbuch Einfuhrung Herzlichen Gluckwunsch zum Kauf Ihres LINDY USB-Seriell Konverters! Dieser Konverter ermoglicht es Ihnen serielle Gerate auf einfache Weise an den Computer uber USB anzuschliessen. D...
Other models in this manual:Chippers - 42857 (2.13 mb)