To operate the system, first push button M-1 on side of switch housing, then pull the bail handle (switch lever) M-2 to the handlebar M-3. To turn the mower off, just release the bail handle. Once the bail handle has returned to the original position it will activate the "Automatic Braking Mechanism”. The motor is electrically braked and the mower blade will stop rotating in 3 seconds or less. VARIABLE SPEED SELF DRIVE SYSTEM - FIGURE N MODEL: SPCM1936 ONLY Your SPCM1936 mower is equipped wit

-Runs but poor cut - The blade may be dull. Turn mower off, wait for blade to stop, UNPLUG mower and carefully check for sharpness. - Blade may be damaged (bent or badly chipped). Turn mower off, wait for blade to stop, UNPLUG mower and replace if necessary. - Grass may be too high or thick for cutting height. Turn mower off, wait for blade to stop, UNPLUG mower and raise cutting height. -Excess vibration - Blade may be loose. Turn mower off, wait for blade to stop, UNPLUG mower then check blade

2. Clippings can be added to your compost bin and used later for a natural fertilizer. CLEANING AND STORAGE DANGER: Be sure the mower is unplugged and the blade has stopped. Remove and clean any debris from the outside of the mower and inside of guard before storage. Store under cover. See MAINTENANCE section. Cleaning out the underside of the mower is done easiest immediately after mowing (ENSURE MOWER IS UNPLUGGED AND BLADE HAS STOPPED). A rag, crumpled newspaper or paper towels, can be used t

1. The extension cord must be polarized and will only plug in one way, orient the wide slot with the wide blade in the switch housing. 2. Loop the extension cord and push the loop up through the hole in the switch housing. 3. Pull the extension cord on the side of the loop that is plugged into the switch housing and remove all the slack in this section of the extension cord. 4. Place the loop over the strain relief tab on the switch housing and pull the extension cord so the loop draws down arou

Observe all the recommended safety instructions before, during and after using your machine, and maintain your machine in good working order. Familiarise yourself with the controls on your machine before attempting to operate it, but above all, be sure you know how to stop your machine in an emergency. Retain this manual and all other literature supplied with your machine for future reference. Safety instructions Training • Never allow children or persons who are unfamiliar with this type of mac

How to use your mower (Fig. E & G) ! Observe all of the relevant warnings when using your mower. G G We recommend the directional method of operation to obtain the maximum cutting performance from your mower and to reduce the risk of the trailing extension lead from entering the cutting path. • Place the bulk of the supply cable on the lawn close to the starting point (Fig. G, position 1). • Hold the handle assembly with both hands. Your switch box incorporates a cable restraint. To fix the cabl

D) Lift the flap (15) and place the grass bag (6) over the lugs. 14 ENGLISH Use Warning! Let the appliance work at its own pace. Do not overload. Adjusting the height of cut (fig. E) The height of cut is adjusted by the central height adjust mechanism. Warning! Disconnect the appliance from the mains and wait until the blade has stopped rotating before proceeding. Set the wheels to the desired height setting with the height adjustment lever (7). Switching on and off Switching on Hold the handle

Know your mower Read all of this manual carefully, observing all the recommended safety instructions before, during and after using your mower, and maintain your mower in good working order. Familiarise yourself with the controls on your mower before attempting to operate it, but above all, be sure you know how to stop your mower in an emergency. Retain this user manual and all other literature supplied with your mower for future reference. Safety instructions Training • Never allow children or

TROUBLESHOOTING TOOL RUNS SLOWLY approximately 5-3/8 inches (136mm) from the spool. If it does, cut it off so that it just reaches the line trimming blade. AUTOMATIC LINE FEED DOES NOT WORK • Keep the tabs depressed and remove the spool from the spool housing in the trimmer head. • Pull the cutting line until it protrudes approximately 5-3/8 inches (136mm) from the spool. If insufficient cutting line is left on the spool, install a new spool of cutting line. • Ensure that the line is not crisscr

Wash hands after handling. CAUTION: Wear appropriate personal hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss. READ ALL INSTRUCTIONS TO REDUCE RISK OF INJURY: • Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual. • Save these instructions and review frequently prior to use and in instructing others. GENERAL SAFETY WARNINGS AND