Votes - 5, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
You can select the picture with the desired exposure from the 3 pictures with different exposures. 1 Press 3 [ ] several times until [AUTO BRACKET] appears, set the compensation range of the exposure with 2/1. AUTO BRACKET SELECT EXIT MENU • You can select [OFF] (0), [d1/3 EV], [d2/3 EV] or [d1EV]. • When you do not use auto bracket, select [OFF] (0). 2 Press [MENU/SET] to finish. • You can also press the shutter button halfway to finish. • When setting auto bracket, the auto bracket icon [ ] appears on the lower left of the screen. • When taking pictures using auto bracket after setting the exposure compensation range, the pictures taken are based on the selected exposure compensation range. When the exposure is compensated, the exposure compensation value appears on the lower left of the screen. • The auto bracket setting is canceled if you turn the camera off or power save mode is activated. • When setting auto bracket and burst mode simultaneously, auto bracket will be performed. • When auto bracket is set, the auto review function is activated regardless of the auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] menu. • When auto bracket is activated, [AUDIO REC.] cannot be used. • The exposure may not be compensated with auto bracket depending on the brightness of the subject. • When the flash is activated or [STARRY SKY] in scene mode is selected, you can take only 1 picture. • If the number of recordable pictures is 2 or less, you cannot take pictures by setting auto bracket. • The auto bracket cannot be used when the ISO sensitivity is set to [ ]. (DMC-FX07) VQT0Y69 Advanced Optical Image Stabilizer This mode detects jitter and compensates for it. 1 Press and hold the optical image stabilizer button A until [STABILIZER] appears. 2 Press 3/4 to select the stabilizer function mode and then press [MENU/SET]. /SET MENU STABILIZER OFF MODE2 DEMO. SELECT MODE1 SET MENU [MODE1] ( ) The stabilizer operates continuously and can assist during photo composition. [MODE2] ( ) The jitter is compensated for when the shutter button is pressed. There is a greater stabilizing effect. [OFF] ( ) When the stabilizer is not desired. .Demonstration of the optical image stabilizer (Demonstration Mode) Press 1 to display the demonstration. After the demonstration ends, the screen returns to the stabilizer function mode selection menu. Press 1 again if you want to exit the demonstration before it ends. While the demonstration is displayed, the optical zoom is fixed to Wide (1k) and the zoom function cannot be activated. You also cannot take pictures. • The stabilizer function may not be effective in the following cases. – When there is a lot of jitter. – When the zoom magnification is high. – In digital zoom range. – When taking pictures while following a moving subject. – When the shutter speed becomes slower to take pictures indoors or in dark places. Be careful of camera jitter when you press the shutter button. • In simple mode [ ] or [SELF PORTRAIT] (P52) in scene mode, the setting is fixed to [MODE2] and in [STARRY SKY] (P54) it is fixed to [OFF]. The stabilizer function mode selection menu does not appear. • In motion picture mode [ ], [MODE2] cannot be set. VQT0Y69 Advanced Taking Pictures using Burst Mode 1 Press and hold the burst mode button. 3 2 Press 3/4 to select a mode. BURST SHOOTING HIGH SPEED LOW SPEED UNLIMITED OFF SETSELECT MENU • You can also press the burst mode button to select. 3 Press [MENU/SET]. • You can also press the shutter button halfway to finish. • The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set. 4 Take a picture. • Hold down the shutter button fully to activate the burst mode. .Number of pictures recorded in burst mode Burst speed (pictures/ second) Number of recordable pictures (pictures) 3.1 max. 6 max. 8 2.1 approx. 2 (DMC-FX07) approx. 1.5 (DMC-FX3) Depends on the remaining capacity of the built-in memory (DMC-FX3)/card. .1 The burst speed is constant regardless of the transfer speed of the card. • The number of pictures indicated is when the shutter speed is faster than 1/60 and the flash is not activated. • If you set the ISO sensitivity (P72) to [ISO400], [ISO800] or [ISO1250] and then take pictures using burst mode, burst speed will become slower than the figures indicated above. (DMC-FX07) • Since the shutter speed becomes slower in dark places, the burst speed (pictures/ second) may also become slower. • In simple mode [ ], the settings become as follows. [ ] appears on the screen. (P27) –[ ENLARGE]: /Max. 6 pictures –[ 4qk6q/10k15cm]/[ E-MAIL]: /Max. 8 pictures • When the burst mode setting is set to Unlimited – You can take pictures until the capacity of the built-in memory (DMC-FX3) or the card is full. – The burst speed will become slower halfway. The burst speed of a MultiMediaCard becomes even slower than that of an SD Memory Card or SDHC Memory Card. However, the ex...