Login:
Votes - 2, Average rating: 3 ( )

User manual Sunbeam, model PU4800

Manafacture: Sunbeam
File size: 136.71 kb
File name: d7a91283-fc43-4b58-b131-e4eb5a1e2154.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


• Turn the power off and remove the plug when the appliance is not in use and before cleaning. • Do not use your appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person. • Always use your appliance from a power outlet of the voltage (A.C. only) marked on the appliance. • Close supervision is necessary when your appliance is being used near children or infirm persons. • Never leave an appliance unattended while in use. • Young children should be supervised to ensure that they do not play with the appliance. • Do not use an appliance for any purpose other than its intended use. • Do not place an appliance on or near a hot gas flame, electric element or on a heated oven. Do not place on top of any other appliance. • Do not let the power cord of an appliance hang over the edge of a table or bench top or touch any hot surface. • For safety reasons and to avoid maintenance by unskilled persons, some appliances are ‘sealed’ using tamperproof screws. Such appliances should always be returned to the nearest Sunbeam Appointed Service Centre for adjustment or repair if required. • Do not operate any electrical appliance with a damaged cord or after the appliance has been dropped or damaged in any manner. If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment. • For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances. • Do not immerse the appliance in water or any other liquid unless recommended. If you have any concerns regarding the performance and use of your appliance, please visit or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. Heading 4 Features of your 1600W Dryer 1600 watt Removable concentrator nozzle Cool shot button 2 heat/speed settings Soft touch 5 Folding handle Dual voltage switch Non-slip pad Easy grip handle Hanging loop Features of your Straightener Power on light Straightening plates On/off switch Variable temperature selector Scissor action handle Using your 1600W Dryer Before using your 1600W Dryer • Squeeze excess moisture from your hair and towel dry. • Comb hair free of tangles using a wide toothed comb. • Apply your favourite styling product. Using your hairdryer • Fold the handle down away from the barrel until it clicks into the open position. • Use a pen to select the appropriate setting on the voltage switch. • Insert the plug into a power outlet and turn the power on. • Select the desired heat / speed setting. Setting I is best for controlled styling whilst setting II is ideal for fast drying. • Hold the hairdryer about 30 cm away from your hair. • Section your hair in 4-5cm strips and dry each section before moving on to the next. • Use the concentrator nozzle onto specific areas of the hair for spot drying or when styling. • Once hair is dried use the cool shot setting to cool the hair and set the style. Using your Straightener Using your straightener • Insert the plug into the power outlet and turn the power on. • Move the on/off switch to the on position (I) • Select the desired heat level by rotating the temperature dial on the side of the straightener. Use lower heat for fine hair or touch ups. Use higher heat for thicker hair or more resistant curls. • Allow the straightener to heat up for a few moments before using. • Brush hair thoroughly. Separate out section of hair approximately 4cm in width and smooth it with a comb. • For best results start at the scalp and work to the ends of the hair. Place the separated section of hair between the flat plates and close the handle around the hair. • Hold the styler in position for 3 to 5 seconds depending on the hair type. • Once the hair is heated, carefully slide the styler along the section of separated hair, making sure that the hair is heated and straightened all the way to the ends. • Select another section of hair and repeat the process. • Use the cool shot setting on the hairdryer to set the style. Care and Cleaning • Turn your appliance off after use. Always turn the power off and remove the plug before cleaning. • Do not immerse the appliances in water or any other liquid. • To clean the exterior, simply wipe over with a dampened cloth and wipe dry. • To clean the straightening plates, wipe with a soft cloth moistened with a solution of shampoo and warm water. • Do not wind the power cord around appliances as this may cause strain and damage the wiring. • The hairdryer handle can be folded for easy storage or to save space in a suitcase or sports bag. Help Line If you have any additional questions about using your 1600W Hairdryer & Straightener, please call the Sunbeam help line in Australia on 1800 025 059. In New Zealand, please call 0800 786 232. 10 ‘Sunbeam’, is a registered trademark o...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category