Votes - 0, Average rating: 0
(
)
)
|
manual abstract
• BLACK: This lead is for the ground connection. • ORANGE: This lead is for the phone line connection. • PINK: This lead is for the dimmer line connection. • RED: This lead is for connection to the power supply terminal when the ignition switch is set to ACC. • YELLOW: This lead is for connection to the battery (back-up) terminal from which power is always supplied. • BLUE: This lead is for the power antenna connection. • BLUE/WHITE: This lead is for the remote amplifier on connection. C CCSpeaker Connections L LR R 1 2 3 4 5 6 7 8 REARFRONT FRONT REAR Connecting to Auxiliary Equipment (Optional) Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary Equipment. FL (Front Left) FR (Front Right) RL (Rear Left) RR (Rear Right) To AUDIO OUT To AUDIO INTo AUDIO IN Amplifier 8 Basic operation Turning the unit on Press MUTE/PWR (POWER on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press and hold MUTE/PWR (POWER on the remote control). Selecting a source Press SRC S SSrepeatedly to select a source. The indicator lights up in the following order. TUNER > CD > TUNER... Note You cannot select a source if a CD is not inserted. Adjusting the volume Rotate MUTE/PWR (Press VOLUME on the remote control) to adjust the sound level. Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Mute 1 Press MUTE/PWR (POWER on the remote control) to cut the sound. 2 To cancel it, press again. Checking the clock You can see the clock pressing DISP (DISP. on the remote control). Note • If the unit is receiving RDS broadcasting with CT (Clock Time) information, the clock will be shown automatically in the display window . • Unless, “NO CLOCK” appears in the display window. Changing the general settings 1 Press and hold SEL [S](SEL on remote control) so that one of menu items appears. 2 Press SEL [S](SEL on remote control) to scroll between menus. TA ALARM t PI SOUND t DEMO OFF t BEEP 2ND 3 Rotate MUTE/PWR clockwise or unclockwise to select one of the settings specified belows. (Press VOLUME on the remote control.) 4 Press and hold SEL [S](SEL on remote control) to finish the setting. 9 • TA(Traffic Announcement) ALARM / SEEK TA ALARM : When a newly tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK : When the newly tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station which has the same PI as the last station, but has the TP information. • PI (Programme Identification) SOUND / MUTE PI SOUND : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound after 1 second. PI MUTE : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound right now. • DEMO ON / OFF You can change the initial indication on the display to information name (function name, EQ name, etc...) while listen to a source. DEMO ON Displays information name while listen to source. DEMO OFF Cancels the function. • BEEP 2ND / ALL Sets the beep sound every time a button is pressed. BEEP 2ND The beep is generated when a key is long pressed. (1 sec) BEEP ALL The beep is generated when any key is pressed. RDS AF/REG FUNCTION To switch on or off the AF function (Network-Tracking), shortly press the AF(REG) button. To switch on or off the REG function (Regional Network Tracking), press the AF(REG) button longer than 2 seconds. • AF(Alternative frequency) ON / OFF When the reception quality worsens, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. AF ON (“AF” appears on display window) : Wherever you drive, you can continue to listen to the same program without interruptions. AF OFF (“AF” disappears on display window): Only station name will be displayed. In case of poor reception no alternative station can be used. • REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.) 10 Using the EQ (Equalizer) Press EQ repeatedly. The indicator lights up in the following order. POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER1 t USER2 t OFF • POP : Optimized for R&B, Soul and Country music. • CLASSIC : Optimized for orchestral music. • ROCK : Optimized for Hard Rock and Heavy Metal music. • JAZZ : Sweet sound with soft feeling. • VOCAL : Powerful realism with strong sound quality. • SALSA : Reproduces salsa music acoustics. • SAMBA : Reproduces samba music acoustics. • USER1 : Use t...