Votes - 3, Average rating: 4.7 ( )

Manafacture: Toshiba File size: 2.85 mb File name: Language of manual:

When using an S video cable, do not connect the yellow video cable. To video input To S video input TV or monitor with audio/video inputs • Make the following setting. On-screen display Select: Page “Audio Out Select” “Bitstream” or 66 “PCM” 69 Notes • Refer to the owner’s manual of the connected TV as well. • When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. • Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected. 78 INTERLACED outputs/inputs (ColorStream®) PROGRESSIVE outputs/inputs (ColorStream®Pro) Some TVs or monitors are equipped with component video Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy inputs that are capable of reproducing a progressively higher quality picture playback. scanned video signal. Connecting to these inputs allows Actual labels for component video inputs may vary you to view the highest quality pictures with less flicker. depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. Connections AV IN AV OUT S VIDEO BITSTREAM/PCM COMPONENT VIDEO DC IN 12V Connecting to an audio system and TV equipped with component video inputs Signal flow To audio inputs of the amplifier (red) (white) To COMPONENT VIDEO TV equipped with component video inputs Audio system Switching the output signal Component video cable (supplied) To AV OUT To CB (blue) To CR (red) To Y (green) Audio cable (not supplied) (INTERLACED/PROGRESSIVE) Video signals of both interlace and progressive scanning formats are output from the player’s COMPONENT VIDEO connector. Press the MONITOR button on the main unit repeatedly and select the type of output signal according to the scanning format of the connected TV. 23 MONITOR Select “External Interlaced” or “External Progressive”. Notes When the AV OUT or BITSTREAM/PCM jacks are connected to the audio input terminals of an audio system, sounds of discs can be heard on the connected audio system. For instructions on connections to audio systems, see 82 . • Make the following setting. On-screen display Select: Page “Bitstream” “Audio Out Select” or “PCM” 69 66 • Refer to the owner’s manual of the connected equipment as well. • When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player away from the tuner and radio. • The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the player’s power cord. If you leave the amplifier power on, the speakers may be damaged. 79 Connections Connections Connecting to Headphones You can listen to movies and music privately by connecting headphones. Caution When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. To (headphone) jack Connecting headphones Connect headphones to the headphone jack using a stereo mini plug. Before connecting, temporarily turn down the volume with the headphone volume control. Readjust to your preference when playback starts. • Turn off the player before you connect or disconnect the headphone cable. Possible shakes produced by plug connecting/disconnecting may cause damage to the disc. • You can connect up to 2 headphones. Headphones (not supplied) Viewing Pictures From Connected Video Equipment You can use the LCD of this player to monitor pictures of video equipment connected via the AV IN jack. Press the AV SOURCE button, then switch disc mode, card mode and external AV input mode. In the external AV input mode, screen saver function/auto power OFF function becomes ineffective. AV IN AV OUT S VIDEO BITSTREAM/PCM COMPONENT VIDEO DC IN 12V To video output (yellow) Audio/video cable (supplied) To audio output (red) To AV IN To audio output (white) Signal flow Video equipment Note When supplying non-standard signals such as playback images from a video deck or images from a game player, some images may be displayed incorrectly. 80 Connecting to Audio Equipment You can enjoy high quality dynamic sounds by connecting the player to audio equipment. • For connection to your TV, see “Connecting to a TV” . 78 79 • For details of output sound, see 49 . • This section uses the following reference marks. : Front speaker : Rear speaker : ...

Download now

Please, enter two numbers from picture: