Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
No. No de cat. Cat. No. 5378-20 5378-21 TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL. AFIN DE REDUIRE LE RISQUE DOIT LIRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, USUARIO DEBE MANUAL DEL OPERADOR. 13 mm (1/2") TALADRO-MARTILLO GENERAL SAFETY RULES — FOR ALL POWER TOOLS POWER TOOL USE AND CARE SPECIFIC SAFETY RULES POWER TOOL USE AND CARE SPECIFIC SAFETY RULES WORK AREA SAFETY 1. Keep work area clean and well lit.Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in thepresence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep children and bystanders awaywhile operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 4. Power tool plugs must match theoutlet. Never modify the plug in anyway. Do not use any adapter plugs with earthed (grounded) power tools.Unmodified plugs and matching outlets will reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord awayfrom heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock. 8. When operating a power use an extension for outdoor use. Use of a cord suitable for outdoor use reduces shock. WARNING READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS PERSONAL SAFETY 9. Stay alert, watch what you are doing and use common sense whenoperating a power tool. Do not usea power tool while you are tired orunder the influence of drugs, alcoholor medication. A moment of inattention while operating power tools may result in serious personal injury. 10. Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. 11. Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. 12. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. 13. D...
Other models in this manual:Power Screwdrivers and Drills - 5378-20 (1.38 mb)
Power Screwdrivers and Drills - 5378-20 (1.38 mb)
Power Screwdrivers and Drills - 5378-20 (1.38 mb)
Power Screwdrivers and Drills - 5378-21 (1.38 mb)