Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Modular Control Block Options A1 - Full Feature Block l Pneumatic signal ports for stop, start and cycle complete l Facility for using proximity switches to sense depth and datum positions l Control of feed and retract speed A6 - Simple Control Block l Forward and retract port for control via remote valves l Facility for using proximity switches to sense depth and datum positions multiple spindle and tapping heads General Information l All performance data is obtained at a line pressure of 6.3±0.15 bar in accordance with ISO2787 (1984). • Modular components for flexibility ofspeed and function l All speeds are nominal. l Performance data is subject to alteration without prior notice. • Simple interfaces for communicating toother equipment l Unless stated otherwise dimensions are in mm. l All imperial dimensions and performance data have been calculated from the measured metric values. • Control options including peck feed, dwelland skip feed l Sound levels are ±2dB(A) measured using CAGI-PNEUROP test code. l Before using an AFD always refer to the operating and warning instructions supplied with the tool. l For AFD models maximum power is achieved at 50% of no load speed. ** AFD415, AFDE400/410 and AFDE600/610/62O tools only AFD Applications Ease of Incorporation into Machine or Process • Extensive range of mounting clamps • Control interfaces to link AFD(E) to other equipment through pneumatics or electrically • Single signal required for AFD(E) to perform cycle • Output signals at datum and depth • Electric motor mounting on 200, 400 and 600 series can be rotated through 180. Modular Design • Flexibility of unit function and speed • Common components in differing models reducing inventory • Multiple spindle head options • Drill and tapping options for all models Model Codes Model Type Pneumatic Feed and Drive AFD205, AFD215 0.22kW (0.29HP) AFD415 0.38kW (0.50HP) AFD/AFT60 0.52kW (0.70HP) Pneumatic Feed, Electric Drive AFDE200 0.25kW (0.33HP) AFDE400, AFDE600 0.33kW (0.40HP) AFDE410, AFDE610 0.75kW (1.00HP) AFDE620 1.10kW (1.50HP) AFDE700 1.50kW (2.00HP) AFDE710 2.20kW (3.00HP) Electric Feed and Drive via Leadscrew AFTE270 0.18kW (0.24HP) AFTE470 0.38kW (0.50HP) AFTE480 0.75kW (1.00HP) Output Spindle** Output spindle to be supplied. Control Block A1 – Full feature type* – Automatic cycle A6 – Simple type** – Remote cycle control A7 – Leadscrew type – PNP A8 – Leadscrew type – NPN No Load Speed The free output speed of the drill or tapper with no drilling or tapping load applied. * Not required on AFTE models. ** Does not apply for AFD60 and AFT60. How to Order AFDE400 AFDE400AFDE400 — —— 2850 28502850 — —— A1 A1A1 + ++ B24 B24B24 Model Code Model CodeModel Code No Load Speed No Load SpeedNo Load Speed Control Block Control BlockControl Block Output Spindle Output SpindleOutput Spindle What is an AFD? The Desoutter range of Auto Feed Drills and Tappers are fixture mounted tools combining linear feed and rotation for machining and tapping operations. There are 3 basic model types: • AFD/AFT – Pneumatic Feed and Drive • AFDE – Pneumatic Feed with Electric Drive • AFTE – Electric Drive and Feed via a Leadscrew A wide range of accessories allow the tools to be configured to suit the application and include mounting clamps, output spindles, multiple spindle heads and various controloptions for interfacing with PLC’s or pneumatics. Drilling Pneumatic Drive AFD205/ AFD215 pneumatic drive • Options of compact AFD205 or long stroke AFD215 • High thrust / size ratio • Capacity up to 5mm (3/16”) in aluminium • Modular output spindles SPEED 650, 1000, 2700, 4350, 10000, 18700 TOOL TYPE POWER THRUST STROKE WEIGHT HP N mm kg AFD205 0.30 400 50 3.9 AFD215 0.30 400 90 4.2 AFD415 pneumatic drive • Compact unit design • Long working stroke of 100mm (3.94”) • Spindle sealed to IP64 standard • Capacity up to 8mm (5/16”) in mild steel, 10mm (3/8”) in aluminium • Modular output spindles SPEED 490, 790, 1250, 2100, 3400, 5400, 7000, 18000 TOOL TYPE POWER THRUST STROKE WEIGHT HP N mm kg AFD415 0.51 706 100 6.2 AFD60 pneumatic drive • Heavy duty pneumatic unit Chuck supplied fitted to tool, 10mm (3/8”) for 1600-4300rpm and 13mm (1 / 2”) for Full feature control block fitted as standard Capacity up to 16mm (5/ 8”) in aluminium, 12mm(1 /2") in mild steel 550, 700, 1000, 1600, 2100, 3000, 4300 l550-1000rpm llTOOL TYPE POWER THRUST STROKE WEIGHT HP N mm kg AFD60 0.70 1200 95 8.1 SPEED Drilling Electric Drive AFDE200 electric drive • Compact unit size • High speed options up to 22400 rpm @ 50Hz, 26900 rpm @ 60Hz with K42 output • Capacity up to 5mm (3/16”) in aluminium • Modular output spindles SPEED 850, 1200, 2350, 2850, 3750, 4600, 5250, 8000, 10000 TOOL TYPE POWER THRUST STROKE WEIGHT HP N mm kg AFDE200 0.34 320 90 10.1 AFDE400/ AFDE410 electric drive • Comprehensive speed range 330-10000 rpm @ 50Hz, 400-11900 rpm @ 60Hz • 0.33kW (0.44HP) and 0.75kW (1.00HP) options • Capacity up to 10mm (3/8”) in aluminium or 8mm (5/16”) in mild st...