Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
300 mA 12 V DC). If the car features a glass antenna, connect to the antenna booster power supply terminal. When an external power amp is being used with this system, be sure not to connect the blue/white lead to the amp’s power terminal. Likewise, do not connect the blue/white lead to the power terminal of the auto-antenna. Such connection could cause excessive current drain and malfunction. To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially, insulate the unused speaker leads without fail. There is a possibility of short-circuiting if the leads are not insulated. To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side is black. Connect the connectors of the same colors correctly. If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours. The black lead is ground. Please ground this lead separately from the ground of high-current products such as power amps. If you ground the products together and the ground becomes detached, there is a risk of damage to the products or fire. Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. Connecting the Units When not connecting a rear speaker lead to a Subwoofer IP-Bus input (Blue) Front output This product Subwoofer output or Non Fading Output Multi-CD player (sold separately) IP-BUS cable Connecting cords ’ with RCA pin plugs (sold separately) Power amp (sold separately) Power amp (sold separately) Antenna jack Refer to a Handsfree Telephone unit’s manual (sold separately). Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections. Yellow To terminal always supplied with power regardless of ignition switch position. Fuse holder Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange To lightnig switch terminal. Black (ground) To vehicle (metal) body. Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max. 300 mA 12 V DC). _\_ Front speaker With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Front speaker Left Rear speaker Subwoofer Perform these connection when using a different amp (sold separately). System remote control ft] Front speaker © White^ j 11 ^Gray © White/black Green Gray/black Violet Pt] © Green/black Violet/black © Front speaker Right Rear speaker Subwoofer ■ When using a Subwoofer without using a different amp (sold separately) IP-Bus input (Blue) This product Refer to a Handsfree Telephone unit’s manual (sold separately). Front Multi-CD player (sold separately) IP-BUS cable Antenna jack Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections Yellow To terminal always supplied with power regardless of ignition switch position. Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. Orange To lightnig switch terminal. Black (ground) To vehicle (metal) body. Fuse holder Fuse resistor Fuse resistor