|
Other manuals for this model:
manual abstract
Select this when the TV does not support the automatic lipsync function or “HDMI Auto” is set to “Off.” Adjustable range 0 ms to 240 ms Adjustment 1 ms increments Default setting 0 ms J1 : The Adaptive DRC setting is also effective when you use headphones. En 40 SETUP Setting various functions (Setup menu) ¦ Auto-adjusting Dolby Digital and DTS dynamic range D.Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) playback. Max (Default) Produces audio without adjusting the dynamic range. STD Sets the standard dynamic range suitable for home use. Min Sets the dynamic range at the lowest level for playback. This is useful for low-volume audio. ¦ Setting the maximum volume Max Volume Sets a maximum volume level so that the audio is not played too loudly. The default setting of +16.5 dB produces the highest volume. ¦ Setting the startup volume Init.Volume Sets the initial volume for when this receiver is turned on. When this parameter is set to “Off,” the volume is set at the level when the receiver last entered standby mode. J1 Adjustable range Off, Mute, -80 dB to +16.5 dB Default setting Off Adjustment 0.5 dB increments ¦ Changing the output destination of HDMI input audio signals HDMI Audio Out Choose whether to playback audio from an external component such as a BD/DVD player connected via HDMI through this unit or through a TV. Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume) Default setting +16.5 dB Adjustment increments 5.0 dB Amp (Default) Outputs audio through this unit only. When this setting is selected, the external component outputs an audio format compatible with this unit. TV Outputs audio through a TV only. When this setting is selected, the external component outputs an audio format compatible with the TV. J2 Amp+TV Outputs audio from the TV and this unit. When this setting is selected, the external component outputs an audio format compatible with this unit and TV. J1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max Volume” setting has priority. J2 : When “TV” is selected, the speakers of this unit do not output sound. En 41 I I I I SETUP Setting various functions (Setup menu) ¦Selecting a template 1 Select “Input Rename” from the Setup menu and press iENTER. 2 Select the input source that you want to rename using iCursor B/ C. SWCLSLSRRHDMI1 HDMI1 VOL. Renaming the input source ¦Entering an original name 1 Select “Input Rename” from the Setup menu and press iENTER. 2 Select the input source that you want to rename using iCursor B/ C. SWCLSLSRRHDMI1 HDMI1 VOL. Renaming the input source 3 Press iENTER. 4 Use iCursor B/ C to select the characters you wish to change, and use iCursor D/ E to enter those characters. The following characters are available for input source. • A to Z, a to z • 0 to 9 • Symbols (#, *, -, +, etc.) • Space 5 Repeat step 4 until you have entered the new input source name. 6 Confirm the new display name by pressing iENTER. Press hSETUP to exit the Setup menu. To cancel a name change, press iRETURN. SWCLSLSRRHDMI1 HDMI1 VOL. Cursor h SETUP i Cursor B/ C/ D/ E i ENTER i RETURN Making the receiver easier to use SWCLSLSRRFunc.Setup SETUPVOL. Func. Setup submenu h Input Rename Changes the input source names. AutoPowerDown Goes into standby mode. Dimmer Sets the Brightness of the front panel display. ¦ Changing input source names i Input Rename Changes the input source names to be shown on the front panel display. You can change an input source name by choosing from a list of templates, or make one of your own. 3 3 Use iCursor D/ E to select a new name from the following templates. Blu-ray Satellite DVD VCR SetTopBox Tape Game MD TV PC DVR iPod CD HD DVD CD-R (blank) 4 4 Confirm the new display name by pressing iRETURN. Press hSETUP to exit the Setup menu. To cancel a name change, select the original name and then press iRETURN to exit renaming. En 42 SETUP Setting various functions (Setup menu) ¦ Goes enter standby mode automatically when you leave it without operating AutoPowerDown If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.” When you wish to activate this function, set the amount of time to pass before this unit will enter standby. Off (Default) Auto Power Down function is disabled. 4hours Goes into standby mode, when you have not operated this unit for four hours. 8hours Goes into standby mode, when you have not operated this unit for eight hours. 12hours Goes into standby mode, when you have not operated this unit for twelve hours. This unit starts a countdown of 30 seconds before entering the standby mode. Pressing any key of the remote control during the countdown cancels entering the standby mode and reset the timer. ¦ Setting the brightness of the front panel display Dimmer Sets the brightness of the front panel display. Lowering...
Other models in this manual:Home Theater Systems - YHT-294 (3.77 mb)
Home Theater Systems - YHT-394 (3.77 mb)