For this reason, a depth greater than the minimum recommended should be considered. Unitary materials are generally rubber mats or a combination of rubber-like materials held in place by a binder that may be poured in place at the playground site and cures to form a unitary shock absorbing surface. 3 Installation of the Lift & Lock Swing The Lift & Lock Swing can be attached to a swing set, pole or tree branch. IMPORTANT! When installing the Lift & Lock Swing, be sure it cannot swing to within o

Adult assembly is required. Tool needed for assembly: Phillips Screwdriver. Use only for a child who is unable to push up on hands and knees, pull up or sit unassisted. • Never leave child unattended. • To prevent suffocation from entrapment, use only the Fisher-Price® pad provided. Never use additional padding or mattress. • To prevent falls, use only for a child who is unable to push up on hands and knees, pull up or sit unassisted. • To prevent strangulation: _ Never place items with a string

• Rechargeable batteries are to be removed from the product before they are charged. • If you use a battery charger, it should be examined regularly for damage to the cord, plug, enclosure and other parts. Do not use a damaged battery charger until it has been properly repaired. Hint: We recommend using alkaline batteries for longer battery life. Hint: If the swinging motion becomes noticeably slower, remove the batteries and replace them with three, new “D” (LR20) alkaline batteries. Dispose of

Adult assembly is required. Tools needed for assembly: Phillips Screwdriver and Adjustable Wrench (both not included). Requires three “D” (LR20) alkaline batteries for operation (not included). Maximum Weight Limit: 24 lbs. (10.9 kg.) The maximum weight limit for this product is 24 lbs. IMPORTANT! If your child weighs less than 24 lbs., but is really active and appears to be able to climb out of the swing, immediately discontinue its use. Swing Cradle Cradle Swing Discover what’s possible™…Model

Adult assembly is required. CAUTION M5 x 113/16" Screw - 2 M5 Lock Nut - 2 M6 x 15/8" Screw - 8 M6 Lock Nut - 8 ALL SHOWN ACTUAL SIZE Spring - 4 Parts 3 Base Pad Metal Canopy Stay 3 Toys (Toys may be different than shown.) 2 Base Wires ® ® 2 Covers Plastic Mesh Cover Stay This product contains small parts in its unassembled state. Adult assembly is required. CAUTION M5 x 113/16" Screw - 2 M5 Lock Nut - 2 M6 x 15/8" Screw - 8 M6 Lock Nut - 8 ALL SHOWN ACTUAL SIZE Spring - 4 Assembly 4 • Open the

Never rely on the tray to restrain child. WARNING B Tighten B Loosen Tray 13 Adjust the seat angle in any of three positions: Upright, Semi-Recline or Recline. To adjust the seat angle: • Push down on the seat back to position the seat wire in the desired groove in the bracket for Upright, Semi-Recline or Recline. • Fit the tray onto the seat armrests. Tray Adjusting the Seat Using the Toybar Upright Semi-Recline Recline • Lift or lower the toybar for baby's enjoyment. Toybar Swinging Swinging I

Never rely on the tray to restrain child. - Never use with an active child who may be able to climb out of the seat. •Never leave child unattended. WARNING B 2 Tighten B Loosen To tighten the restraint: •Feed the anchored end of the waist belt up through the buckle to form a loop . Pull the free end of the waist belt . To loosen the restraint: •Feed the free end of the waist belt up through the buckle to form a loop . Enlarge the loop by pulling on the end of the loop toward the buckle. Pull the

• Insert the M4 bolt through the holder, front leg and into the lock nut. • Tighten the bolt with a Phillips screwdriver. Do not over-tighten. Holder Front Leg 5 8 Tapered End • Position the housing so that the hub is inward. • While pressing the button on the top of a front leg, insert it into the housing slot, as shown. Push the front leg until the button“snaps” into the hole in the housing. • Repeat this procedure to assemble the motor housing to the other front leg. • Pull the front legs dow

Please read these instructions before assembly and use of this product, as they contain important information. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Requires four “D” (LR20) alkaline batteries for operation. Maximum Weight Limit: 24 lbs. (10.9 kg). IMPORTANT! The maximum weight limit for this product is 24 lbs. If your child weighs less than 24 lbs., but is really active and appears to be able to climb out of the swing, immediately discontinue

•Insert batteries as indicated inside the battery compartment. • Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak. •Never short-circuit the battery terminals. • Use only batteries of the same or equivalent type, as recommended. •Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the toy before charging. • If removable, r