Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
For this reason, a depth greater than the minimum recommended should be considered. Unitary materials are generally rubber mats or a combination of rubber-like materials held in place by a binder that may be poured in place at the playground site and cures to form a unitary shock absorbing surface. 3 Installation of the Lift & Lock Swing The Lift & Lock Swing can be attached to a swing set, pole or tree branch. IMPORTANT! When installing the Lift & Lock Swing, be sure it cannot swing to within one meter (three feet) of any other object in front of, behind, or to the side of it. Periodically inspect S-hooks for wear. Metal to metal contact between hooks may cause premature wear. If your swing set does not have a bushing, you may want to replace the existing hook with a hook and bushing assembly available at toy stores and home centers. Swing Set Installation CAUTION Swing Set Hooks (not included) S-Hook (included) Bushing (not included) • Fasten the Lift & Lock Swing S-hooks (included) onto the hooks (not included) on your swing set. 4 Installation of the Lift & Lock Swing Pole or Tree Branch Installation Pole S-Hook Ropes INPORTANT! Before installing, check the strength and stability of the pole or tree branch. Place the Lift & Lock Swing at least one meter (three feet) from a tree trunk or any other structure. • Wrap the S-hook end of the Lift & Lock Swing ropes around the pole or tree branch. • Hook the S-hook around the ropes. Pull down on the ropes to make sure the Lift & Lock Swing is securely fastened. 5 Securing Your Child Release Lever Crotch Belt Restraint Bar Waist Belt Securing Your Child Release Lever Crotch Belt Restraint Bar Waist Belt • Pull the release lever toward you and raise the restraint bar. • Unbuckle the waist belts from the crotch belt. • Place your child in the swing. • Pull the crotch belt up between your child’s legs and fasten both waist belts to the crotch belt. Make sure you hear a “snap” on both ends. • Insert the restraint bar down into the latch until it snaps into place. Pull up on the restraint bar to be sure it is securely latched. To Tighten To Loosen Anchored End Buckle Free End Free End Anchored EndA B A B To tighten the waist belts: • Feed the anchored end of the waist belt up through the buckle to form a loop A. Pull the free end of the waist belt B . • Repeat this procedure to tighten the other waist belt. To loosen the waist belts: • Feed the free end of the waist belt up through the buckle to form a loop A . Enlarge the loop by pulling on the end of the loop toward the buckle. • Pull the anchored end of the waist belt to shorten the free end of the waist belt • Repeat this procedure to loosen the other waist belt. .B 6 Removing Your Child Release Lever Restraint Bar • The release lever is located on the underside of the swing seat. Squeeze the release lever toward the front edge of the swing and lift the restraint bar. Slide the restraint bar up. • Squeeze tabs on the release buckles to unfasten the crotch belt from the waist belt. Helpful Hint: The restraint bar will remain in the up position for ease in placing a child in or out of the Lift & Lock Swing. Cleaning Wash the Lift & Lock Swing with a mild soap and water solution. Rinse with clean water to remove soap residue. Storage Remove the Lift & Lock Swing from your swing set or other location and store it indoors when the outdoor temperature drops below freezing. 7 Three (3) Year Limited Warranty Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia, warrants to the original owner that the Lift & Lock Swing is free from all defects in material and workmanship when used under normal conditions for a period of three (3) years from the date or purchase. This warranty does not cover the swing ropes, color fading of the product or product parts, or damage from excessive weather abuse or acts of God. Should the product fail to perform properly, we will repair or replace it at our option, free of charge. Purchaser is responsible for shipping the product to Mattel Australia Pty. Ltd. at the address indicated above and for all associated freight and insurance cost. Mattel Australia Pty. Ltd. will bear the cost of shipping the repaired or replaced item to you. This warranty is void if the owner repairs or modifies the product. This warranty excludes any liability other than that expressly stated above including but not limited to any incidental or consequential damages. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. Consumer Information Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. Fisher-Price, Inc.,...