Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Turn on Switch the source selector to CD, USB, or FM. Turn off Switch the source selector to OFF. DC IN 4 Play Play disc 1 Switch the source selector to CD. 2 Lift to open the disc compartment. 3 Insert a disc with the printed side facing up, then close the disc compartment. 4 Press to start play. To pause or resume play, press . To stop play, press . For MP3/WMA tracks, press - ALBUM + to select an album. To select a track, press / . To search within a track, press and hold / , then release to resume normal play. Play from USB device Note Make sure that the USB device contains playable audio content. 1 Switch the source selector to USB. 2 Insert the USB device into the socket. » Play starts automatically. If not, press . EN 8 Play from an external device With this unit, you can also listen to an external audio device such as an MP3 player. 1 Switch the source selector to CD, USB, or FM. 2 {JK$ to: the MP3-LINK socket on the unit. the headphone socket on an external device. 3 Play the external device (see the device's & Note The MP3-LINK socket is not for headphones. Listen to FM radio Note Position the antenna as far as possible from TV, VCR or other radiation source. For better reception, fully extend and adjust the position of the antenna. 1 Switch the source selector to FM. 2 Rotate TUNING to tune to an FM radio station. Adjust volume During play, rotate - VOLUME + to adjust volume. 5 Play options Repeat play1 During play, press MODE repeatedly to select: : play the current track repeatedly. : play all tracks repeatedly. 2 To resume normal play, press MODE repeatedly until the repeat icons disappear. 1 During play, press MODE repeatedly until the icon is displayed. » All tracks are played randomly. 2 To resume normal play, press MODE again. Program tracks You can program a maximum of 20 tracks. 1 Press to stop playback. 2 Press PROG to activate the programming mode. » [P01] is displayed. 3 For MP3/WMA tracks, press - ALBUM + to select an album. 4 Press / to select a track, and then press PROG & 5 Repeat steps 3 to 4 to program more tracks. 6 Press to play the programmed tracks. » During play, [P] preset number are displayed. . To erase the program, when playback is stopped, press . 6 Product information Note . Product information is subject to change without prior notice. . Rated Output Power 1 x 1 W RMS Frequency Response 60 Hz - 16 KHz, -3 dB Signal to Noise Ratio >57 dB Total Harmonic Distor tion <1.5 % MP3 Link Input 500 mV Disc Total Harmonic Distor tion <1.5 % Frequency Response 60Hz -16kHz, -3 dB S/N Ratio >57 dB Tuner Tuning Range FM: 87.5 - 108MHz General Power supply - AC Power J?;\\.}..} ..\\. . Input: 100-240 V ~, 50/60 ..%.&.;. ?. 1.1 A - Batter y 6 x 1.5 V R14/UM2/C Cell . EN Operation Power Consumption 3 W Standby Power Consumption < 0.5 W Dimensions -Main Unit 9).). 245 x 212 x 130 mm Weight -Main Unit1.1 kg -With Packing 1.5 kg Maintenance Clean the cabinet . Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs . When a disc becomes dir ty, clean it with a cleaning cloth. Wipe the disc from the centre out. . Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens . After prolonged use, dir t or dust may accumulate at the disc lens.To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. USB playability information Compatible USB devices: ^. ^.\&\ ^. ^.\&\ . memor y cards (requires an additional card E E Supported formats: . ^. ?H;@\`%H;@\[% H;@K` .?.\`$ . JK$ ?K`}K`..$ variable bit rate . 9J;" . Director y nesting up to a maximum of 8 levels <$ $ ! ?) <$ ! ?) . ID3 tag v2.0 or later . File name in Unicode UTF8 (maximum ?\[$ Unsupported formats: . Empty albums: an empty album is an album JK!9J; % is not be shown in the display. . ^ &H )%9 & JK E) & not played. ;;{%9;.%{J .J 9J; &E"%&]% &]%&]%& 9J; . EN 10 7 Troubleshooting . @$ ^. Warning Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page EEE& &! &9 Philips, make sure that the device is nearby and the model number and serial number are available. No power . Ensure that the AC power adaptor of the unit is connected properly. . Ensure that there is power at the AC outlet. . Inser t the batteries with their polarities |!. & . Replace the batter y. No sound . Adjust the volume. No response from the unit . Take out the batteries and turn on the unit again. . Disconnect and reconnect the AC power adaptor, then turn ...