Votes - 4, Average rating: 4
(
)
)
|
manual abstract
as you prefer by using the OUTPUT LEVEL –/+ buttons. OUTPUT LEVEL You can start play at any specified time by connecting a timer (sold separately). Refer also to the instructions for the timer. 1 Select the desired play mode (1DISC or 5DISCS). 2 Press the POWER switch to turn the unit off. 3 Press the POWER switch while pressing the w/d button on the front panel. — OUTPUT LEVEL — — or On the front panel For optimum sound quality Shortly thereafter, “TIMER P. ON” appears in the display and the timer play function is on. (When the timer play function is already on, in which case, “TIMER P. OFF” appears in the display and timer play function is off. In this case, repeat the procedure in steps 2 and 3 to set the timer play function to on.) 4 Set the timer to the desired time. PLAYING English * When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max. * The level of output signals can be checked in the display. CDC-685 only When the set time comes, the unit turns on and starts play. NATURAL SOUND COMPACT DISC PLAYER PLAYXCHANGE 1 2 3 DISC 4 5 POWER OUTPUT LEVEL PROG 1 2 3 4 5 +10 6 7 8 9 0 PEAK PHONES 2,3 3 n When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL –/+ buttons. * Note that the use of the OUTPUT LEVEL –/+ buttons will also vary the level of the signal output to an amplifier, etc. PHONES E-15E CD SYNCHRONIZED RECORDING CD SYNCHRONIZED RECORDING Using a compatible YAMAHA tape deck, you can synchronize the tape deck to start recording automatically when a CD starts playing. With this function, you can record a CD on tape more easily and precisely. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time. SYNCHRO DIMMER CLOSE TIME PEAK PROGCLEARTAPE 321 654 987 OUTPUT LEVEL— —— ——INDEX100 MODE OPEN/ TEXT/ 1 RANDOMREPEAT DISC SKIPDISC SCAN 5 2 4 1Select a disc. DISC SKIP 2Load a tape on the tape deck. * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) PEAK 3Press the SYNCHRO button. SYNCHRO This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit blinks. 4If desired, select the track to be recorded first. 123 DISC SKIP 654 987 ——100 or 5Press the w button. Both CD play and tape deck recording begin. * CD play begins a little later than recording. 6If you want to stop recording temporarily and restart recording from a desired track, follow steps 3–5 again. n To cancel this function Press the a button. Notes • To finish or stop recording, press the a button on the tape deck. • Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to pages 12–13 for the programming procedure.) • This function can also be used together with the tape- programming function. (Refer to pages 17–20.) TRACK PROGRAMMING FOR RECORDING TRACK PROGRAMMING FOR RECORDING This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) Automatic Tape Programming The unit will automatically program tracks on a disc with the original order of tracks unchanged. SYNCHRO DIMMER CLOSE TIME PEAK PROGCLEARTAPE 321 654 987 OUTPUT LEVEL— —— ——INDEX100 MODE OPEN/ TEXT/ 2 4 RANDOMREPEAT DISC SKIPDISC SCAN 5 1 3 1Stop the unit. 2Select the disc. DISC SKIP 3Enter the tape’s total possible recording time (tape length). TAPE 46 You can select any of four tape lengths by pressing the TAPE button. 46 TAPE (OFF) 54 60 90 You can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 64 12 64 4Press the REPEAT button. REPEAT The unit automatically programs tracks for side A and side B separately considering the tape’s total time. * The programmed track numbers and the total number of tracks for side A and B are displayed for a short time. 5Begin recording on the tape deck and press the w button at the same time. 6The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. Notes • It is recommended that you use a tape that is slightly longer in length than the CD you are recording, because the programmed tracks on a CD may not fit properly into the time allowed on each half of the tape. • CD synchronized recording fu...
Other models in this manual:CD Players - CDC-585 (2.58 mb)