Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
2Select the disc. DISC SKIP 3Enter the tape’s total possible recording time (tape length). TAPE 46 You can select any of four tape lengths by pressing the TAPE button. 46 TAPE (OFF) 54 60 90 You can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 64 12 64 4Press the REPEAT button. REPEAT The unit automatically programs tracks for side A and side B separately considering the tape’s total time. * The programmed track numbers and the total number of tracks for side A and B are displayed for a short time. 5Begin recording on the tape deck and press the w button at the same time. 6The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. Notes • It is recommended that you use a tape that is slightly longer in length than the CD you are recording, because the programmed tracks on a CD may not fit properly into the time allowed on each half of the tape. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 5 and 6, press the SYNCHRO button and then press the w button. Recording automatically begins. (For details, refer to page 16.) FUNCTIONS English E-17E TRACK PROGRAMMING FOR RECORDING n Display information during programming 3 5 20:00 1 2 3 4 5 PROG 1 2 345 12 1 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. 2 Shows the total time of programmed tracks for each side. 3 Shows the programmed track numbers for each side. Manual Tape Programming With this function, you can program tracks from one or more discs in any order to be recorded onto tape. SYNCHRO DIMMER CLOSE TIME PEAK PROGCLEARTAPE 321 654 987 OUTPUT LEVEL— —— ——INDEX100 MODE OPEN/ TEXT/ 2,5 RANDOMREPEAT DISC SKIPDISC SCAN 1 8 4 6 1Stop the unit. 2If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP buttons in turn. * This unit will read the contents of a disc by this operation. If there is a disc to which this operation is omitted, tracks on the disc cannot be programmed. 3Follow step 3 on page 17. 4 PROG PROG A-1 5If necessary, select a desired disc by pressing the DISC SKIP buttons. 6Select a desired track. 123 654 987 ——100 7Repeat steps 5 and 6 to program more tracks for side A of the tape.You can select the same track again. * If “ERROR” appears in the display, the track number just selected cannot be programmed because there is no enough time remaining on side A of the tape. TRACK PROGRAMMING FOR RECORDING 8When you finish the programming for side A, n Display information during pro- program the pause mode by pressing the TAPE grammingbutton. TAPE --A-1 1 2 3 4 5 PROG 1 2 345 67 8 9 10 * “PAUSE” lights up in the display, and after then you can begin programming for side B. 9Repeat steps 5 and 6 to program more tracks for side B of the tape. You can select the same track again. * If “ERROR” appears in the display, the track number just selected cannot be programmed because there is no enough time remaining on side B of the tape. Start recording on the tape deck and press the w button at the same time. The unit will pause at the end of side A of the tape.Turn the tape over to side B. Resume recording and, at the same time, press the w or d button. Notes • In steps 7 and 9, even if “ERROR” appears in the display, you can program another track of which time is shorter than the remaining time on the side of the tape. At this time, if any other track number lights up in the display, you can program it. • CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in steps 10 and 11, press the SYNCHRO button and then press the w button. Recording automatically begins. (For details, refer to page 16.) Notes on tape programming • To check, cancel or correct program data, refer to page 13. • The maximum number of tracks that can be programmed is 40. If, however, the PAUSE mode is inserted, it is counted as one track. • This function can be used to program up to track number 20. If the disc has more than 20 tracks, tracks with track number 21 and higher cannot be programmed. 1 2 4 4 -8:28 1 2 3 4 5 PROG 1 2 345 67 8 9 10 3 1 Shows the side of the tape and the program number for the track to be programmed next. 2 Shows the selected disc and track number. 3 Shows the total remaining time on the side of the tape. 4 Programmed track numbers light up and programmable track numbers among the unprogrammed ones blink. * If “A-1” does not appear in the display after the PROG button is pressed, press the TEXT/TIME display mode- select button. * If, during programming, the TEXT/TIME display mode- select button is pressed, the program number display ...
Other models in this manual:CD Players - CDC-685 (2.58 mb)