CAUTION Do not attempt to repair the CD-R/RW drive yourself. Contact your dealer or local SAMSUNG representative for all repairs. Use of controls or adjustments or performance of procedures other than those specified here in may result in hazardous radiation exposure. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARRANTY Please refer to the Samsung limited warranty statements. http : //samsungelectronics. com. 1 Front View of the Drive Rear View

I re-booted my PC and it paused After installing the device driver, your system during the start-up program. start-up program may take more time than expected. If it does not start-up after 60 seconds, verify your AUTOEXEC. BAT file and, if necessary, contact your local computer dealer. The disc tray does not open. The drive may not be installed correctly. Verify the physical installation. In the File Manager, the CD-ROM icon does not display. I installed the software and rebooted my PC. The CD-

1 1 Turn OFF your computer. Remember to verify the configuration jumper on the rear of the CD-ROM drive. 2 2 Remove the cover of your PC. (main unit of the computer) 3 3 Remove the blank cover panel of the 5.25 inch unit in which the CD-ROM drive is to be installed. 4 4 Connect the CD-ROM drive to the IDE interface and power cables Iocated inside your computer. . Connectors are keyed so it is impossible to put them in an incorrect position. Do not force the connectors, if they do not seem to fit

CAUTIO N Do not attempt to repair the CD-ROM drive yourself. Contact your dealer or local SAMSUNG representative for all repairs. Use of controls or adjustments or performance of procedures other than those specified here in may result in hazardous radiation exposure To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARRANT Y Please refer to the Samsung limited warranty statements. m 1 Front View of the CD-Rear View of the CD- COMPACT 12 34 5 6 Headp

2 Type CDSETUP and press [Enter] . 3 Reboot the computer. Manual Setup 1 Make the C:\SAMSUNG directory. 2 Copy the files from the diskette to the C:\SAMSUNG directory. To do so, type COPY A: * . * C:\SAMSUNG after the C:\ prompt and press [Enter] . 3 Edit the CONFIG.SYS file. Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000 /V entry. LAST DRIVE = Z - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -DEVICE

Installing the DVD-ROM Drive 1 Make sure that the PC is powered off and disconnected from any power source. 2 If necessary, attach a horizontal bracket to both sides of the drive. 3 Remove the cover from a free expansion slot and install the DVD-ROM drive, as shown in the illustration. Item Description Computer Intel Pentium III (or higher), 350MHz or higher, 128 MB of RAM (or higher) with an IDE interface Disk space 100 MB minimum Windows version Windows 95 OSR2 / 98 / 2000 / ME / XP /Windows N

1 1 2 3 4 5 Digital output terminal You can connect a sound card or MPEG card which support Digital output terminal to your drive using this two-pin terminal. 1 Turn OFF your computer. Remember to verify the configuration jumper on the rear of the CD-ROM drive. 2 Remove the cover of your PC(main unit of the computer) 3 Remove the blank cover panel of the 5.25 inch unit in which the CD-ROM drive is to be installed. 6 Put the cover back on your PC. 5 Install the CD-ROM drive into the unit and secu