[ENGLISH]
Playing AVCHD formatted DVDs
AVCHD is a new format (standard) for high definition video cameras that can be used to record and play high-resolution HD images. This unit can play
AVCHD format images recorded to a DVD-RAM, DVD-R/RW or DVD-R DL.
≥When a disc recorded in the AVCHD format is being played, the video may be paused at portions spliced due to deletion or edition for a few seconds.
Enjoying high quality sound
This unit comes equipped with a Dolby TrueHD and DTS-HD§ decoder. When connected to a compatible amplifier/receiver via the HDMI AV OUT or 7.1ch
AUDIO OUT terminals, you can enjoy surround sound recorded with Dolby TrueHD or DTS-HD.
Additionally, when using the DIGITAL AUDIO OUT terminal and the following settings are performed, Dolby Digital/DTS Digital Surround sound can be
enjoyed as surround sound or Dolby TrueHD/DTS-HD audio can be enjoyed as 2ch audio.
§ This unit supports DTS-HD High Resolution Audio, however it does not support DTS-HD Master Audio. DTS Digital Surround will be used as an
alternative.
≥When playing discs recorded with Dolby TrueHD or DTS-HD,
–audio will not be output properly (e.g. audio from some speakers cannot be heard) unless the number of connected speakers is the same as audio
channel specification of the disc.
–even if you select “Small” in the speaker settings, audio output will have an effect similar to when “Large” is selected (➡ page 24 in the operating
instructions).
Dolby TrueHD and DTS-HD digital audio output settings
Follow the instructions given on page 21 of the operating instructions, select the display shown below, match with the connected device and then set the
audio output method in 4.
1 [SETUP] ➡ 2 “Sound” ➡ 3 “Digital Audio ➡ 4 “Dolby Digital Plus/Dolby ➡ 5 “Bitstream” or
Output”
TrueHD” or “DTS-HD”
“PCM”
≥Bitstream:
The bitstream signal of Dolby Digital or DTS Digital Surround is output.
≥PCM (factory preset):
Dolby TrueHD or DTS-HD PCM sound is output in 2 channels.
≥Refer to pages 9–10 in the operating instructions for amplifier/receiver connection methods.
Control with HDMI (VIERA Link “HDAVI ControlTM”)
The following function has been added to the contents on page 18 of the operating instructions.
Easy control only with VIERA remote control
If you connect this unit to the TV that has “HDAVI Control 2” function with an HDMI cable, you can operate this unit using the following buttons on the TV
remote control.
[3, 4, 2, 1], [OK], [RETURN], [EXIT], [OPTION] and the coloured buttons.
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
≥Refer to the TV operating instructions for operating TV.
Using the OPTION menu window to
Using the Control Panel
operate this unit
By using the TV remote control, you can play discs using the
Using the Control Panel, you can operate search backward, search
“Control Panel” (➡ below) and display the Top Menu (for BD-Video and
forward, stop, etc, with the TV remote control.
DVD-Video) or Pop-up Menu (for BD-Video).
Perform steps 1 and 2 of “Using the OPTION menu window to operate
1 Press [OPTION].
this unit” (➡ left).
This can also be displayed by using the VIERA menu screen.
The Control Panel is displayed (➡ right).
Control Panel
≥When playing BD-Video or DVD-Video, etc.
e.g.
Control Panel
Control Panel is displayed
Pause
–[3]: Pause, [4]: Stop, [2]: Search backward,
Exit
(➡ right).
[1]: Search forward, [OK]: Play,
Control Panel
Top Menu
Top menu is displayed
[EXIT]: Exit the screen.
Search
Search
Top Menu
[BD-V] [DVD-V]
(➡ page 15 in the operating
≥While playing still pictures
Play
instructions).
–[4]: Stop, [2]: View previous picture,
Pop-up Menu
Stop
[
Menu
Menu is displayed
1]: View next picture, [EXIT]: Exit the screen.
ENTER
[DVD-V]
(➡ page 15 in the operating
RETURN
instructions).
Pop-up Menu
Pop-up menu is displayed
[BD-V]
(➡ page 15 in the operating
instructions).
Rotate RIGHT [JPEG] Rotate the still picture
(➡ page 17 in the operating
Rotate LEFT [JPEG]
instructions).
∫ When you want to leave the TV on and set only this
Zoom in [JPEG]
Enlarge or shrink the still
unit to standby mode
picture (➡ page 17 in the
Zoom out [JPEG]
Press [Í BD] on this unit’s remote control and set to standby mode.
operating instructions).
∫ When not using “HDAVI Control”
[Note] You cannot use the OPTION menu while the Top Menu for
Set “Control with HDMI” in the Setup menu to “Off” (➡ page 23 in the
BD-Video or DVD-Video is displayed.
operating instructions)
2 Select an item then press [OK].
≥VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports
HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 2” function. “HDAVI Control 2” is the newest standard (current as of February, 2007) for Panasonic’s HDAVI Control
compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.

---

...

Other models in this manual:
Blu-Ray Players - DMPBD10AEG (737.49 kb)
Blu-Ray Players - DMPBD10AGN (737.49 kb)
Blu-Ray Players - DMPBD10APP (737.49 kb)
Blu-Ray Players - DMPBD10EG (737.49 kb)