Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
Reprodukcija Kontrola sa HDMI (HDAVI ControlTM)
Kontrola sa HDMI (HDAVI ControlTM)
Što je HDAVI kontrola?
HDAVI kontrola je napredna funkcija koja nudi povezane operacije ovog uređaja, i Panasonic televizije (VIERA) ili pojačala/receivera pod
HDAVI kontrolom.
HDMI IN
≥Preporučeno je da korisitie Panasonicove HDMI kabele.
HDAVI
Preporučeni tvornički dijelovi:
kompatibilan
RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m),
TV
RP-CDHG50 (5.0 m), itd.
HDMI OUT
≥Nakon spajanja uređaja na TV sa HDMI kabelom,
podesite “Control with HDMI” na “On” (23).
HDAVI
kompatibilno
≥Podesite HDAVI kontrolne operacije na spojenoj opremi
pojačalo/reciever
(npr., televiziji).
HDMI IN
≥Upalite svu HDAVI Control kompatibilnu opremu, podesite televizo
Ovaj uređaj
na standby mode i upalite ga ponovno, te tada podesite ulazni
AV OUT
kanal spojene HDAVI Control opreme.
HDMI AV OUT
Pogledajte stranicu 8 (Konekcija C) ili 9 (Konekcija D) za detaljna
podešavanja.
Funkcije koje su omogućene sa HDAVI kontrolom su...
One touch play
≥When [ONE TOUCH PLAY] or
[1] (PLAY) is pritisniteed on this
You can turn on this unit, television and amplifier/receiver, and start playing the disc in the
unit for “Automatic input switching”
play position with a single pritisnite of a button.
NOTE
or
“Power on link”, the playback image
Pritisnite [ONE TOUCH PLAY].
is not immediately displayed on the
ONE TOUCH
≥When operating, point the remote control at the remote control
watch the contents from where
PLAY
signal sensor on the main unit.
playback started.
In this case, pritisnite [:] or [6]
to go back to where playback
Automatic input switching
When the fol owing operations are performed the television will automatically switch the input
channel and displays the corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., Direct Navigator screen)
Power on link
When the television is off and the following operations are performed, the television wil
automatically turn on and displays the corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., Direct Navigator screen)
Power off link
All connected equipment compatible with HDAVI Control including this unit is automatically
set to standby mode when you set the television to standby mode.
≥This unit is automatically set to standby mode even during playback or any other operation.
≥Only this unit is set to standby mode when you pritisnite the standby/on button of the unit
or
the remote control for shutting it down. Other connected equipment compatible with HDAVI
RQT8746
18
...