Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
If there is still no change in the display, consult your dealer. 2 Follow the on-screen instructions and make the settings with [3, 4, 2, 1] and press [OK]. For wireless LAN connection: If you are using a Wireless router (Access point) that supports WPS, you can easily perform the settings by selecting “WPS (PUSH button method)”. Otherwise, perform the settings by selecting “Search for access point” or “Manual setting” in “Other methods”. OK RETURN Access Point Connection Setting Select a connection method to use with an access point of Wireless LAN. Please refer to the operating instructions of the access point about connection methods. WPS (PUSH button method) Other methods WPS (PIN code method) Search for access point Manual setting .WPS (Wi-Fi Protected Setup) is a function that facilitates settings relating to the connection and security of wireless LAN devices. To see whether your Wireless router (Access point) supports WPS, check the Wireless router operating instructions. VQT2H86 When you experience problems with settings Access Point Connection Setting OK Access Point Connection Setting Failed to connect to the access point. A conflict with another device occurred. Do you want to configure Access Point ConnectionSetting again ? Yes No Display Check the following A conflict with another device occurred. .Please wait a few moments, and then try again. A time out error occurred. .Setting of the Wireless router (Access point) for MAC Address etc. .The signal may be weak. Using the USB extension cable included with the Wireless LAN Adaptor, adjust the position of the Wireless LAN Adaptor. .The SSID* and the encryption key of the Wireless router (Access point). .Please wait a few moments, and then try again. An authentication error or a time out error occurred. A device error occurred. .Connection of Wireless LAN Adaptor If there is no improvement in symptom, contact our Customer Service Center. Network Easy Setting (Connection Check) OK Network Easy Setting (Connection Check) Yes No Complete. 1. LAN cable connection 2. IP address setting3. Connection to gateway LAN cable is not connected. Please check the connection. Select “Yes” and press [OK] to check networkconnection again. Select “No” and press [OK] to finish Network Easy Setting. : Fail : Fail : Fail 1. LAN cable connection or Connection to access point 2. IP address setting 3. Connection to gateway 1. LAN cable connection or Connection to access point 2. IP address setting :Pass : Fail : Fail :Pass : Pass .Connection and settings of the hub and router .Settings of “IP Address/ DNS Settings” (• 28) 3. Connection to gateway : Fail Network Easy Setting (Internet Connection Check) OK Network Easy Setting (Internet Connection Check) Complete. - Connection to the Internet : Fail(Error code: B019) Failed the connection test. Cannot find the server.(Error code: B019) Please refer to the operating instructions for the causeof the error and the solution for it. Press [OK]. Display Check the following Cannot find the server. (Error code: B019) .“Primary DNS” and “Secondary DNS” settings of “IP Address/ DNS Settings” (• 28) Failed to connect to the server. (Error code: B020) .The server may be busy or the service may have been suspended. Please wait a few moments, and then try again. .Settings of “Proxy Server Settings” (• 28) and the router • . Refer to the operating instructions of the hub or router. . You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. (• 28) . You can redo these settings individually using “Network Settings”. (• 28) . Do not use this device to connect to any wireless network for which you do not have usage rights. During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access. . After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router (Access point). * An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices. Connections & Settings Display Check the following 1. LAN cable connection or Connection to access point 2. IP address setting 3. Connection to gateway :Fail : Fail : Fail .Connection of the LAN cables (• 10) VQT2H86 Firmware updates Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. [BD65] [BD655] : This unit is capable of checking the firmware automatically when a connected to the Internet via a broadband connection. When new firmware version is available, the following screen is displayed. Firmware Upd...
Other models in this manual:Blu-Ray Players - VQT2H86-1 (2.91 mb)
Blu-Ray Players - DMP-BD655 (2.91 mb)
Blu-Ray Players - DMP-BD65 (2.91 mb)
Blu-Ray Players - DMP-BD45 (2.91 mb)