Votes - 2, Average rating: 3 ( )

Manafacture: Panasonic File size: 2.91 mb File name: Language of manual:

2 Follow the on-screen instructions and make the settings with [3, 4, 2, 1] and press [OK]. For wireless LAN connection: If you are using a Wireless router (Access point) that supports WPS, you can easily perform the settings by selecting “WPS (PUSH button method)”. Otherwise, perform the settings by selecting “Search for access point” or “Manual setting” in “Other methods”. OK RETURN Access Point Connection Setting Select a connection method to use with an access point of Wireless LAN. Please refer to the operating instructions of the access point about connection methods. WPS (PUSH button method) Other methods WPS (PIN code method) Search for access point Manual setting .WPS (Wi-Fi Protected Setup) is a function that facilitates settings relating to the connection and security of wireless LAN devices. To see whether your Wireless router (Access point) supports WPS, check the Wireless router operating instructions. VQT2H86 When you experience problems with settings Access Point Connection Setting OK Access Point Connection Setting Failed to connect to the access point. A conflict with another device occurred. Do you want to configure Access Point ConnectionSetting again ? Yes No Display Check the following A conflict with another device occurred. .Please wait a few moments, and then try again. A time out error occurred. .Setting of the Wireless router (Access point) for MAC Address etc. .The signal may be weak. Using the USB extension cable included with the Wireless LAN Adaptor, adjust the position of the Wireless LAN Adaptor. .The SSID* and the encryption key of the Wireless router (Access point). .Please wait a few moments, and then try again. An authentication error or a time out error occurred. A device error occurred. .Connection of Wireless LAN Adaptor If there is no improvement in symptom, contact our Customer Service Center. Network Easy Setting (Connection Check) OK Network Easy Setting (Connection Check) Yes No Complete. 1. LAN cable connection 2. IP address setting3. Connection to gateway LAN cable is not connected. Please check the connection. Select “Yes” and press [OK] to check networkconnection again. Select “No” and press [OK] to finish Network Easy Setting. : Fail : Fail : Fail 1. LAN cable connection or Connection to access point 2. IP address setting 3. Connection to gateway 1. LAN cable connection or Connection to access point 2. IP address setting :Pass : Fail : Fail :Pass : Pass .Connection and settings of the hub and router .Settings of “IP Address/ DNS Settings” (• 28) 3. Connection to gateway : Fail Network Easy Setting (Internet Connection Check) OK Network Easy Setting (Internet Connection Check) Complete. - Connection to the Internet : Fail(Error code: B019) Failed the connection test. Cannot find the server.(Error code: B019) Please refer to the operating instructions for the causeof the error and the solution for it. Press [OK]. Display Check the following Cannot find the server. (Error ...

Download now

Please, enter two numbers from picture: