Votes - 1, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
•• Please read all Safety precautions before using your headset to ensure safe and proper use. Safety precautions When using your headset while driving, follow local regulations in the region you are in.•• Never disassemble or modify your headset for any reason. Doing this may cause the •• headset to malfunction or become combustible. Bring the headset to an authorised service centre to repair it. Keep your device and all accessories out of the reach of small children or animals. Small •• parts may cause choking or serious injury if swallowed. Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above 45 °C). •• Extreme temperatures can cause the deformation of the device and reduce the charging capacity and life of your device. Do not allow your device to get wet — liquids can cause serious damage. Do not handle your •• device with wet hands. Water damage to your device can void your manufacturer’s warranty. Avoid using your device’s light close to the eyes of children or animals. •• Excessive exposure to sound at high volumes can cause hearing damage. Always turn the volume down before plugging the earphones into an audio source and use only the minimum volume setting necessary to hear your conversation or music. Getting started This section explains what to remember for the proper use of your Bluetooth headset. Your headset overview Make sure you have the following items with your headset: travel adapter, •• ear rubbers, earhook and user manual. The items supplied with your headset may vary depending on your region.•• Charger jack Volume button Earhook Talk button Power switch Earpiece Indicator light Microphone Button functions Button Function Power switch Slide the switch to turn the headset on or off. Talk Press and hold to enter Pairing mode.•• Press to make or answer a call.•• Press to end a call.•• Volume Press to adjust the volume.•• Press and hold to turn the microphone on or off.•• In Pairing mode, press and hold the Volume up button •• to turn the Multi-point feature on. In Pairing mode, press and hold the Volume down •• button to turn the Multi-point feature off. You can hear a beep when the volume level of the headset reaches to the lowest or highest level. Charging the headset This headset has a rechargeable internal battery which is non-removable. Ensure that you fully charge the battery before using the headset for the first time. 1 Plug the small end of the (Highlight) travel adapter into the charger jack. 2 Plug the large end of the (Highlight) travel adapter into a (Highlight) power outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the indicator light changes to blue. Unplug the (Highlight) travel adapter from the (Highlight) power outlet and the headset. Use only a Samsung-approved (Highlight) travel adapter. (Highlight) Unauthorised travel adapters may •• cause an explosion or damage to the headset. The battery will gradually wear out while charging or discharging because it is •• a consumable part. When a call come in while charging, disconnect your headset from the travel •• adapter and answer the call. When the battery charge gets low The headset beeps and the indicator light flashes red. Recharge the battery. If the headset powers off during a call, the call will be automatically transferred to the phone. Checking the battery level At the same time, press and hold the Volume down and the Talk button. Depending on the battery level, the indicator light flashes 5 times in one of the following colours: Battery level Indicator light colour Above 80% Blue 80 ~20% Violet Below 20% Red Wearing the headset Place the headset on your ear. Depending on what ear you are going to wear the headset, simply adjust the ear hook accordingly. Handle the headset properly to improve performance Do not block the device’s internal antenna. The human body can interfere with •• a Bluetooth signal. If you usually use your mobile phone with your right hand, wear the headset •• on your right ear. Avoid coming in contact with the internal antenna of a headset or mobile •• for a better performance. ^ Left ^ Right Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. Activated functions and features may differ depending on the phone type.•• Some devices, especially those that are not tested or approved by Bluetooth SIG, •• may be incompatible with your headset. Turning the headset on or off To turn the headset on, slide up the power switch. The blue indicator light •• flashes 4 times. To turn the headset off, slide down the power switch. The indicator light turns off •• after the blue indicator light changes to red. Pairing and connecting the headset Pairing will create a unique and encrypted wireless link between two Bluetooth enabled devices, such as a Bluetooth phone and a Bluetooth headse...
Other models in this manual:Wireless Accessories - HM1100 (2.14 mb)