Votes - 2, Average rating: 3.5
(
)
)
|
Other manuals for this model:
manual abstract
The travel adapter does not have a power switch, so you must unplug the travel adapter from the outlet to interrupt the power supply. The travel adapter should remain close to the socket when in use. When the headset battery is low The headset beeps and the indicator light flashes red. To charge the battery, see page 6. If the headset powers off during a call, the call will be automatically transferred to the phone. Checking the battery level To check the battery level, press and hold the Volume down button and the Talk button at the same time. Depending on the battery level, the indicator light flashes 5 times in one of the following colours: Battery level Above 80% Indicator light colour Blue 80 ~20% Violet Below 20% Red English 7 Wearing the headset Place the headset on your ear. Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. Wearing the headset Place the headset on your ear. Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. ^ Left ^ Right Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those that are not tested or approved by the Bluetooth Special Interest Group (SIG), may be incompatible with your headset. To ensure you get the best performance from your headset • Keep the distance between your headset and device as small as possible and avoid placing your body or other objects in the signals path. • If you usually use your mobile phone with your right hand, wear the headset on your right ear. • Covering your headset or device could effect its performance so keep contact to a minimum. Turning the headset on or off • To turn the headset on, slide up the power switch. The blue indicator light flashes 4 times. • To turn the headset off, slide down the power switch. The indicator light flashes blue and red then turns off. Pairing and connecting the headset Pairing means unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In Pairing mode, two devices should be placed close enough to each other. English 9 Pairing and connecting the headset with a phone 1 Enter Pairing mode. • With the headset turned on, press and hold the Talk button until the blue indicator light stays lit. • If the headset is turned on for the first time, it will go into Pairing mode immediately. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM1100) from the list of devices found by your phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Your headset supports the Simple Pairing feature which allows the headset to be paired with a phone without requesting a PIN. This feature is available for phones that are compliant with Bluetooth version 2.1 or higher. The headset can also be paired via the Active pairing feature. See page 13. Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected to 2 Bluetooth phones at the same time. 1 After connecting with the first Bluetooth phone, press and hold the Talk button until the blue indicator light stays lit. 2 Press and hold the Volume up button to activate the Multi-point feature. 3 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone’s user manual). 4 Select the headset (HM1100) from the list of devices found by the second Bluetooth phone. 5 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect the headset to the second Bluetooth phone. 6 Reconnect to the headset from the first Bluetooth phone. When connecting the headset to 2 Bluetooth phones, some phones may not be able to connect as a second Bluetooth phone. English 11 To turn Multi-point feature on In Pairing mode, press and hold the Volume up button. To turn Multi-point feature off In Pairing mode, press and hold the Volume down button. To turn Multi-point feature on In Pairing mode, press and hold the Volume up button. To turn Multi-point feature off In Pairing mode, press and hold the Volume down button. Disconnecting the headset Turn off the headset or use the Bluetooth menu on your phone to remove the device from your pairing list. Reconnecting the headset If the headset loses the connection to the paired phone, • Press the Talk button on the headset or use the Bluetooth menu on your phone. Your headset will attempt to automatically reconnect each time you turn it on. This feature may be unavailable on some phones. If the Multi-point feature is activated, your headset will attempt to reconnect to the two most recently connected devices. EnglishPairing via the Active pairing feature With the Active pairing feature, your headset can automatically look for a ...
Other models in this manual:Wireless Accessories - HM1100 (992.6 kb)