Votes - 2, Average rating: 3 ( )

Manafacture: Allstar Products Group File size: 169.36 kb File name: Language of manual:

After installing your receiver and transmitter, check the operation of your radio controls by moving approximately 35 feet back from the garage door, then press the transmitter button. Operation at this distance should be reliable. B. If the transmitter doesn’t activate the operator, check the coding switches on both the transmitter and receiver to assure an “exact” match. ( See Fig. 2 & 3) . This may necessitate a reprogramming of a Quik Code Classic transmitter to match the receiver coding switches. C. If the distance is inadequate, check the battery and replace if necessary. (Also See Step 4D). D. To maximize the operating distance move the transmitter to different locations in the car until a satisfactory distance is achieved. E. If the receiver is in the proximity of a metal beam or other obstruction it may be necessary to relocate the receiver to increase the operating range. F. If multiple receivers are mounted closer than 15 feet, blocking and interference may occur. Relocate the receivers farther apart. G. If system does not work at any distance, check that the receiver terminals are connected to the proper operator terminals. See Step 2A. Manufacturer’s Limited Warranty Allstar warrants its radio controls to be free from defect in material and workmanship for a period of one (1) year from the date of purchase. To obtain service, contact your dealer. To obtain service under this warranty the buyer must obtain authorization instructions for the return of any goods from Allstar before returning the...

Download now

Please, enter two numbers from picture: