Votes - 4, Average rating: 3.5 ( )

Manafacture: Pioneer File size: 1.75 mb File name: Language of manual:

Photos and specs  Pioneer  DEH-1220MP

Adjustment range: SLA +4 to SLA-4 Audio Adjustments Audio Adjustments • Press A (audio) to select the audio function. After selecting, perform the following procedures to set the audio function. Note You can also turn loudness on or off by pressing and holding EQ/LOUD. Using the equalizer • Press EQ/LOUD to select the equalizer. DYNAMIC—VOCAL—NATURAL—CUSTOM —FLAT—POWERFUL • CUSTOM allows you to create a customized setting. • When FLAT is selected no adjustments are made to the sound. 0 En CD English Section 02^ ( Operating this unit ) Other Functions Important Powersave mode is cancelled if the vehicle battery is disconnected and will need to be turned back on once the battery is reconnected. When powersave is off, depending on connection methods, the unit may continue to draw power from the battery if your vehicle's ignition switch doesn't have an ACC (accessory position). Adjusting initial settings 1 Press SRC/OFF and hold until the unit turns off. 2 Press SRC/OFF and hold until function name appears in the display. 3 Press F (function) to select the initial setting. After selecting, perform the following procedures to set the initial setting. FM (FM tuning step) Normally the FM tuning step employed by seek tuning is 50 kHz. When AF orTA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. • The tuning step remains at 50 kHz during manual tuning. 1 Press c or d to select the FM tuning step. 50 (50 kHz)—100 (100 kHz) TITLE (multi language) This unit can display the text information of a compressed audio file even if they are embedded in a Western European or Russian language. • If the embedded language and the selected language setting are not the same, text information may not be displayed properly. • Some characters may not be displayed properly. 1 Press c or d to select the language. EUR (European)—RUS (Russian) Using the AUX source 1 Insert the stereo mini plug into the AUX input jack. 2 Press SRC/OFF to select AUX as the source. Sound muting Sound is muted automatically when: • Acall is made or received using a cell phone connected to this unit. • Voice guidance is output from a connected Pioneer navigation unit. The sound is turned off, MUTE is displayed and no audio adjustments, except volume control, are possible. Operation returns to normal when the phone connection or the voice guidance is ended. 0 A-PI (auto PI seek) The unit can automatically search for a different station with the same programming, even during preset recall. 1 Press a or b to turn Auto PI seek on or off. AUX (auxiliary input) Activate this setting when using auxiliary device connected to this unit. 1 Press a or b to turn auxiliary setting on or off. SAVE (power saving) Switching this function on enables you to reduce the consumption of battery power. • Turning on the source is the only operation allowed when this function is on. 1 Press a or b to turn the power save on or off. CD En Appendix (^Additional Information Troubleshooting Symptom Cause Action (See) The display automatically returns to the ordinary display. You did not perform any operation within about 30 seconds. Perform operation again. The repeat play range changes unexpectedly. Depending on the repeat play range, the selected range may change when selecting another folder or track, or when fast forwarding/reversing. Select the repeat play range again. NO XXXX appears when a display ischan-ged (e.g., NO T-TTL). No text information embedded Switch the display or play another track/file. The unit is malfunctioning. There is interference. You are using a device, such as a cell phone, that transmits electromagnetic waves near the unit. Move electrical devices that may be causing the interference away from the unit. s Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error message. Message Cause Action ERROR-11,12, 17,30 Dirty disc Clean disc. ERROR-11,12, 17, 30 Scratched disc Replace disc. ERROR-10,11, 12,15,17, 30, A0 Electrical or mechanical Turn the ignition switch OFF and back ON, or switch to a different source, then back to the CD player. ERROR-15 The inserted disc is blank Replace disc. ERROR-22, 23 Unsupported CD format Replace disc. FRMTREAD There is some- Wait until the mes-times a delay be- sage disappears tween the start of and you hear playback and sound. when you start to hear any sound NO AUDIO The inserted disc does not contain any playable files Replace disc. PROTECT All the files on the inserted disc are embedded with DRM Replace disc. SKIPPED The inserted disc contains DRM protected WMA files Replace disc. H Handling guideline Discs and player Use onlydiscsfeaturing eitherof following two logos. f| COMPACT ri COMPACT GüOÉQd m ÉGB DIGITAL AUDIO DIGITAL AUDIO I TEXT I Use 12-cm or 8-cm CD. Do not use an adapter when playing 8-cm CDs. Use...

Download now

Please, enter two numbers from picture: