Votes - 2, Average rating: 5
(
)
)
|
Other manuals for this model:
manual abstract
¦¦“. (device name)”: The selected Bluetooth device is busy. ¦¦“- (device name)”: The selected Bluetooth device is on standby. ¦¦“(blank) (device name)“: The Bluetooth device is deselected. 7 Hold to finish the procedure. ¦¦To cancel the Bluetooth mode, press . Bluetooth Device Registration Test You can check whether your Bluetooth device can be registered using this unit. 1 Press and hold to enter easy pairing mode “PAIRING” is displayed. Search for the Bluetooth device. When search is completed, “FINISHED” is displayed. ¦¦When “(device name)” is displayed, select "[NEW DEVICE]" and press the control knob. ¦¦When “DEVICE FULL” is displayed, delete a Bluetooth device and retry. 1. Turn the volume knob to select the Bluetooth device, then press and hold to confirm. 2. Turn the volume knob to select “YES”, then press to confirm. 2 Turn the volume knob to select a Bluetooth device name, press and hold to confirm. “BT TEST MODE” is displayed. 3 “CONFIRM DVC” is displayed. If “PAIRING OK” is displayed, proceed to step 6. If “PIN CODE” is displayed, proceed to steps 4. If “*** NG” is displayed, press the volume knob. Proceed to steps 3. 4 Input the PIN code ¦¦Turn the volume knob to select the number. ¦¦To move to the next digit, press .. ¦¦To delete the last digit, press 4. 5 Press the volume knob to transmit the PIN code. 6 The connection result, “OK” or “NG”, is displayed. ¦¦“PAIRING”: Registration to this unit ¦¦“HF CONNECT”: Hands-free phoning ¦¦“AUD CNT”: Audio playback ¦¦“PB DL”: Phone Book downloading 7 Press to exit pairing mode. ¦¦Data (Phone Book, etc.) of the cell-phone checked for connection does not remain in CONTENTS this unit. Continued to next page English 23 CONTENTS Bluetooth Setup 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. ¦¦See table below for selection. ¦¦Repeat step 3 until the desired item is selected/activated. ¦¦Press to return to the previous item. 4 Hold to finish the procedure. ¦¦To cancel the Bluetooth mode, press . Item Selectable setting (Preset: *) PAIRING DEVICE SEARCH Registers a Bluetooth device (pairing). (For details, see page 22.) PHONE SELECT Selects a cell-phone connection. (For details, see page 22.) AUDIO SELECT Selects a Bluetooth audio player connection. (For details, see page 22.) S-DVC SELECT (For details, see page 22.) DEVICE DELETE Cancel registration of the Bluetooth device. 1. Turn the volume knob to select the Bluetooth device, then press to confirm. 2. Turn the volume knob to select “YES”, then press to confirm. DETAILED SET PIN CODE EDIT Specify the PIN code required when registering this unit using the Bluetooth device. By default, “0000” is specified. 1. Turn the volume knob to select the number. ¦¦To move to the next digit, press .. ¦¦To delete the last digit, press 4. 2. Press the volume knob to register a PIN code AUTO ANSWER OFF: Does not answer the phone call automatically. ; 0: Automatically answers the phone call at once. ; 1 – 8 * –99: Automatically answers the phone call after lapse of 1 – 99 seconds. RECONNECT ON *: Automatically reconnects the selected Bluetooth device when radio wave becomes strong enough, even after it is disconnected. ; OFF: Cancels. ¦¦When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by selecting [PHONE SELECT]/ [AUDIO SELECT]. BT HF/AUDIO FRONT *: Outputs audio from the front speakers. ; ALL: Outputs audio from the all speakers. CALL BEEP ON *: Sets whether to output a beep from the speaker when a call comes in. ; OFF: Cancels. BT F/W UPDATE Display the firmware version and update the firmware. MIC GAIN 1 — 20 * — 30: Adjust the sensitivity of the microphone for telephone call or adjusts the voice of the caller. NR LEVEL –1 — 0 * — +1: Reduce the noise generated by the surrounding environment without changing the built-in microphone volume or adjusts the voice of the caller when it is not clear. Setting to “+” increases the noise reduction. EC LEVEL –1 — 0 * — +1: Adjust the level of echo cancellation. Setting to “+” increases the echo cancel reduction. 24 English English 25 SMS (Short Message Service) Downloading the SMS 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [SMS], then press to enter. 4 Turn the volume knob to select [SMS DOWNLOAD], then press to enter. 5 Start downloading ¦¦During downloading: “DOWNLOADING” is displayed. ¦¦After completion of downloading: “COMPLETE” is displayed. 6 Hold to finish the procedure. ¦¦To cancel the Bluetooth mode, press . ¦¦The cell-phone must be able to transmit the SMS using Bluetooth. Setting on the cellphone may be required. If the cell-phone does not support an SMS function, the SMS download item is not displayed in the Settings mode. ¦¦When the SMS is downloaded from the cell-phone, the unopened messages in the cell-phone are open...