Votes - 3, Average rating: 3.7 ( )

Manafacture: Bunn File size: 737.53 kb File name: Language of manual:

2/K). By pressing the “h” button (Fig. 2/H) or “min” (Fig. 2/J) immediately afterwards you can programme the switch-on time in just the same way as you set the time of day. The display reverts automatically from the programmed time to the time of day. Once the switch-on time has been programmed it remains pre-set, and can be checked at any time by pressing the “progr” button (Fig. 2/K). Note :The switch-on time must be programmed before you can activate the timer. 3. Activating the timer After you have programmed the switch-on time, activate the timer function by pressing the “auto” button (Fig. 2/D). The lettering “auto” will appear in the display (Fig. 2/F). The switch-on time previously selected will become active again every 24 hours in the timer-operation condition, i.e. so long as the letter “auto” is visible in the display. The data stored in the timer will not be lost if the power should fail for a short time. If you wish to use the appliance in the normal mode of operation again, press the “auto” button once again and the “auto” lettering in the display will disappear. You can also switch the appliance on directly with the “01” button (Fig. 2/A). The lettering “auto” will then disappear from the display and the operational mode indicator (Fig. 2/B) will light up. Cleaning The swivelling filter can betaken out for cleaning (Fig. 9). Swing itouttothe right as far as it will go. It can then be lifted out.Toclean the filtervalve thoroughly, please actuate it several times while washing it up. To fit the swivelling filter back into place, hook it on to the hinge jointfrom above and swing it in to the left. Clean the appliance all over with a damp cloth - but never immerse it in water! The coffee jug and its lid are safe in a dish-washing machine. De-scaling ... so that your coffee-maker will continue to serve you for many years The service life of your coffee-maker will be longer if you de-scale it regularly. If you use a gold filter, this must be taken out of the swivelling filter before de-scaling starts. An environmentally friendly de-scaling agent should be used, such as is widely available in the trade. Only ever use it in accordance with the manufacturer’s instructions. You first fill the fresh-water tank with water, and then you add the de-scaling agent to it. Then, swing the swivelling filter back into the appliance and place the coffee jug, with its lid, on the warming plate. (Please note that the jug lid has the job of opening the filter valve, so a cycle can only run properly if it is in place.) Leave the solution for 15 minutes to work in. - KF 1050: Now switch the appliance on by means of the “01” button (Fig. 2/A) and let the water and de-scaling agent run through. - KF 1064 and KF 1066 Black Line: These appliances are equipped with a de-scaling programme, which can be started at any time if the appliance is switched off. If de-scaling is necessary, the de-scaling display (Fig. 2/P) will start to flash. It does no...

Download now

Please, enter two numbers from picture: