Votes - 5, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. Cleaning the If the terminals on dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is stained, with a dry soft cloth such as a silicon If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Cleaning the CD Slot As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if you put them in a dusty CD slot. The marking (Except for some CLASS 1 LASER PRODUCT The label is attached to the chassis/says that the component uses laser that have been classified as Class 1. It that the unit is utilizing laser beams that are a weaker class. There is no danger of hazardous radiation outside the unit. — 4— About About Refer to the instruction Hands Free Unit KCA-accessory), when connected, operation method. The locations of the buttons shown below. SRC .4 FM AM MENU DISP GSM About CDs Handling CDs • Don’t touch the recording • CD-R and CD-RW are easier to damage a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs CD accessories Don’t use disc type accessories. CD cleaning Clean from the center outward. Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CDs with coloring on the recording surface or that are dirty can’t be used. • This unit can only play the CDs with . It may not correctly play disks which do not have the mark. • A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) CD storage • Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. — 5— English English This unit can play however, that the MP3 recording are limited. When writing restrictions. Acceptable media The MP3 recording media acceptable and CD-RW. When using CD-RW, do full format not quick format to malfunction. Acceptable medium formats The following formats are available for the maximum number of characters used for file delimiter (".") and three-character extension are indicated parentheses. • ISO 9660 Level 1 (12 characters) • ISO 9660 Level 2 (31 characters) • Joliet (64 characters) • Romeo (128 characters) Up to 200 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section Entering file and folder names below. The media reproducible on this unit has the following limitations: • Maximum number of directory levels: 8 • Maximum number of files per folder: 255 • Maximum number of characters for folder name: 64 • Maximum number of folders: 50 MP3 written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed. Settings for your MP3 encoder and CD writer Do the following setting when compressing audio data in WMA data with the WMA encoder. • Transfer bit rate: 8 —320 kbps • Sampling frequency: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz When you use your CD writer to record MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check Disc at Once. Entering ID3 The Displayable ID3 1.x. For the character code, List of Codes. Entering file and folder names The code list characters are the only file names and folder names that can be entered and displayed. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. The unit recognizes and plays only those MP3 which extension (.MP3). A file with a name entered with characters not on the code list play correctly. Writing files into a medium When a medium containing MP3 data is loaded, the unit checks all data on the medium. If the medium contains a lot of folders or nonMP3 files, therefore, it takes a long time until the unit starts playing MP3. In addition, it may take time for the unit to move to the next MP3 file or a File Search or Folder Search may not be performed smoothly. Loading such a medium may produce loud noise to damage the speake...
Other models in this manual:Car Receivers - KDC-5024 (1.76 mb)
Car Receivers - KDC-5024V (1.76 mb)
Car Receivers - KDC-507 (1.76 mb)
Car Receivers - KDC-6024 (1.76 mb)