|
manual abstract
About CDs................................... 5 Playing CD General features ......................... 6 Playing External Disc Power Fast Forwarding and Reversing Selecting the Source Track Search Volume Album Search Attenuator Track/Album Repeat Loudness Track Scan System Q Random Play Audio Control Magazine Random Plays Speaker Setting Accessories...............................13 Clock Display Adjusting Clock Installation Procedure ..............13 DSI (Disabled System Indicator) Connecting Wires Theft Deterrent Faceplate to Terminals ..........................14 Tuner features.............................9 Installation................................15 Tuning Mode Troubleshooting Guide .............17 Tuning Specifications ...........................20 CRSC (Clean Reception System Circuit) Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting — 2— Safety Safety G To prevent injury or following precautions: • Insert the unit all the way locked in place. Otherwise it place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. • Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately. 2CAUTION To prevent damage take the following precautions: • Make sure to ground the unit 12V DC power supply. • Do not open the top or bottom covers unit. • Do not install the unit in a spot exposed direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. • To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers. • Do not subject the faceplate to excessive shock, as it is a piece of precision equipment. • When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction. • To prevent a short circuit when replacing a fuse, first disconnect the wiring harness. • Do not place any object between the faceplate and the unit. • Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. IMPORTANT INFORMATION About CD players/connected to this KENWOOD disc changers/ released in 1998 or later can this unit. Refer to the catalog or consult dealer for connectable models of changers/ CD players. Note that any KENWOOD disc changers/ players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. You can damage both your unit and the CD changer if you connect them incorrectly. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. — 3— English EnglishE • If you experience problems installation, consult your • If the unit does not seem right, try pressing the reset button that does not solve the problem, your Kenwood dealer. • Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored. CLK ADJ AUTO AME SCANAUD RDM REP M.RDMOFF CRSC LOUD Reset button • Characters in the LCD may become difficult to read in temperatures below 41 °F (5 °C). • The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Cleaning the If the terminals on dirty, wipe them with a dry, soft cloth. Cleaning the Unit If the faceplate of this unit is stained, with a dry soft cloth such as a silicon If the faceplate is stained badly, wipe the stain off with a clot...
Other models in this manual:Car Receivers - KDC-126 (501.94 kb)
Car Receivers - KDC-126S (501.94 kb)
Car Receivers - KDC-2026 (501.94 kb)
Car Receivers - KDC-226B (501.94 kb)