Votes - 2, Average rating: 5
(
)
)
|
manual abstract
Note: This warranty does not cover labor costs for the removal and reinstallation of the unit. IN ORDER FOR THIS WARRANTY TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN AUTHORIZED DEI DEALER. ALL UNITS RECEIVED BY DEI FOR WARRANTY REPAIR WITHOUT PROOF OF DEI DEALER INSTALLATION WILL BE COVERED BY THE LIMITED 1 YEAR PARTS AND LABOR WARRANTY. Note: This warranty does not cover labor costs for the removal and reinstallation of the unit. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND Directed SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. © 2003 Directed Electronics, Inc FEATURES Woofer • Retuned neodymium design supplies enhanced midbass performance. • Lightweight injection-molded fiberglass- reinforced low-profile basket. • Basket incorporates break-away sections for universal domestic and import applications. • Vented spider area for higher power handling. • Injection-molded graphite-filled woofer cone. • Rubber surround for better low frequency linearity. • 25mm four-layer voice coil with Kapton polyimide former. Tweeter • New hotter 25mm ferrofluid cooled silk dome tweeter with neodymium magnet. WARNING High-powered car audio systems may produce sound pressure levels that exceed the threshold at which hearing loss may result. • Swiveling flush and surface mount tweeter housings provided. Crossover • Outboard 6/12 dB per octave crossovers with Zobel compensation, tweeter attenuation, and dual tweeter protection elements. • Mylar capacitors in all series pass positions. • Glass epoxy PCB for better system power handling. Applications • s550 fits standard 5.25” domestic and 130mm European applications. • s550 also supplied with adapter plated for 5x7/6x8 mounting. • s650 fits 6.5S domestic and 170mm European applications. They may also impair a driver’s ability to hear traffic sounds or emergency vehicles. Use common sense and practice safe listening habits when listening to or adjusting your audio system. © 2003 Directed Electronics, Inc SOUND QUALITY Obtaining the highest quality sound reproduction in the mobile environment requires installation techniques and knowledge of vehicle interiors that go far beyond simple replacement of stock speakers. Speaker location, orientation, phasing, and the vehicles interior materials are important considerations when designing and installing an auto sound system. To achieve the best sound quality possible from your Directed Studio loudspeakers, Directed recommends the installation be performed by an MECP certified technician. INSTALLATION PRECAUTIONS The Directed s550/s650 neodymium separates are designed for installation into factory speaker locations, custom mounting enclosures or any flat mounting surface inside the vehicle with sufficient rear clearance. The following precautions and instructions cover the basic and most common types of installation. • Check behind panels for clearance of metal brackets, hoses, and wire harnesses before making any cuts. • When mounting speakers into doors, roll the window up and down to check clearance of the glass and window regulator. • Make sure the mounting holes are the correct size for the speaker. Undersized holes can cause speaker distortion or shorting of the speaker leads to the chassis ground. Oversized holes will not allow the mounting screws to make sufficient contact with the panel, allowing the speaker to become loose. • Always protect the wires when routing by avoiding sharp metal edges, moving parts such as heater or vent controls, clutch pedals, brake pedals, steering columns, and power window motors and gears. • When routing wires through metal panels and doorjambs always use vinyl tubing and grommets for protection and a professional-looking installation. © 2003 Directed Electronics, ...
Other models in this manual:Car Audio - s650 (239.54 kb)
Car Audio - s550 (239.54 kb)
Car Audio - s650 (239.54 kb)