Votes - 0, Average rating: 0
(
)
)
|
manual abstract
aj3980/17 1/9/03 10:08 AM Page 1
This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject to
1
English
CONTROLS/ INSTALLATION
SETTING THE CLOCK AND ALARM TIMES
Return your Warranty Registration card today to
the following two conditions:
ensure you receive all the benefits you’re entitled to.
1. This device may not cause harmful interference, and
CD:
This can be useful when for example you need to be
CD Clock Radio
CONTROLS (see figure 1)
MEMORY BACKUP
AJ3980
AJ
1 2 3 4 5
2. this device must accept any interference received, including interference that may cause unde-
woken up at a different time during the week and at the
• Once your Philips purchase is registered,
• So complete and return the Warranty
^ &
6
1SLEEP TIMER - adjusts timer options for CD / radio
- starts / pauses CD playback
The memory backup conveniently allows your clock,
sired operation.
weekend.
you’re eligible to receive all the privileges
Registration Card enclosed with your
- switches CD / radio on.
- stops CD playback
alarm and radio presets to be stored for up to 3
7
minutes when there is a power interruption e.g. AC
SETTING THE ALARM TIME
of owning a Philips product.
purchase at once, and take advantage
2CD - starts CD playback
/
- skips to the next / previous CD tracks
power failure. The complete CD clock radio and display
1. In the standby mode, press ALARM 1 / ALARM 2
of these important benefits.
8
3RADIO - switches on radio
- fast search within a track
will be switched off. As soon as the power supply
to select the alarm mode. Check the respective
4TIME / ALARM
Radio:
returns, the display will indicate the correct time.
icon appears in the display: CD
radio
/
L'appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement soumis aux deux
Read this manual first!
PORTANT
TUNING
/
(up / down)
Warranty
Owner
Model
CD / RADIO OFF
• If power supply returns after 3 minutes, you will
buzzer
IM
!
Return
.
conditions suivantes:
If you have any problems, do not attempt
- tunes to radio stations automatically/ manually
your Warranty
- switches off CD / radio
need to re-enter the clock and alarm time settings.
Either press briefly:
Verification
Confirmation
Registration
1. Cet appareil ne doit pas provoquer d'interférences nuisibles, et
to return this product to the store.
9
PRESET 1 - 5 - to select / store a radio preset station
Registration Card
- selects clock display
• ALARM 1 once for CD alarm
. This enables
BAND
- selects waveband (FM/AM).
Registering your product
Your completed Warranty
Returning your Warranty
2. Cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de
For fast help, call us first!
within 10 days
CONNECTING HEADPHONES
5WAKE-UP TRACK - programs your favorite CD
CD playback from the first track as your alarm call.
within 10 days confirms
Registration Card serves
Registration Card right
S
$ALARM 1
provoquer un fonctionement peu satisfaisant.
E
E
0
1-800-531-0039
E
track for wake-up track alarm.
Connect headphones with a 3.5 mm plug into the p jack.
your right to maximum
as verification of owner-
away guarantees you’ll
W
• ALARM 2 once or more for radio
/ buzzer
H Y I N SID
- selects CD
alarm
6
=The built-in speaker will now be muted on the set.
PUSH TO OPEN - push this corner to open CD door
alarm.
protection under the
ship in the event of prod-
receive all the information
!
- switches CD alarm on/ off
terms and conditions of
uct theft or loss.
and special offers which
7DAILY ALARM RESET - stops the active alarm for
DISPLAY BRIGHTNESS
2. Press SET AL 1 or SET AL 2 to activate the alarm
%p - 3.5 mm jack for headphones
your Philips warranty.
you qualify for as the
setting mode.
24 hours
owner of your model.
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento dependiente de dos
#
^Coil antenna - improves FM reception
In the dim / medium setting, the backlight is interactive
=The current alarm time display flashes.
8+ / - VOLUME - adjusts the volume
and gently fades in and out whenever you press a touch
condiciones siguientes:
&Power cord
3. Press HOUR/ MINUTE to adjust the hours and
1. Este aparato no puede provocar interferencia dañina, y
%
screen control.
9REPEAT ALARM/ BRIGHTNESS CONTROL
There are 3 settings: bright ª medium ª dim
minutes respectively.
Know these
For Customer Use
2. Este aparato debe aceptar cualquier interferenciarecibida, incluyendo las interferencias que
- switches off the alarm for a 9 minute period
INSTALLATION (see figure 2)
• Press REPEAT ALARM/
Enter below the Serial No. which is locat-
puedenprovocar un funcionamiento insuficiente.
BRIGHTNESS CONTROL once or more.
• With your finger held down on HOUR/ MINUTE,
safety
- switches off timer function
symbols
AC Power Supply
the display will increase the hours / minutes
ed on the rear of the cabinet. Retain this
- changes the brightness of the display window
1. Check if the power voltage, shown on the type plate
SETTING THE CLOCK TIME (see figure 3)
rapidly and continuously.
information for future reference.
C A U T I O N
0Main display
on the bottom of the set, corresponds to your
• Press HOUR/ MINUTE briefly and repeatedly to
@
The time is displayed using the 12 hour clock where the
RISK OF ELECTRIC SHOCK
- shows clock time and function status
power supply. If it does not, consult your dealer or
DO NOT OPEN
Model No. ________________________
PM indicator lights up (on = PM, off = AM).
adjust the time slowly.
- shows radio frequency and CD track number
service center.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
1. In the standby mode, press TIME SET to activate
4. Press SET AL 1 or SET AL 2 again when you
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
briefly when respective function is in use
Canada
2. Connect the plug to the wall outlet.
have reached the correct time.
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Serial No. ________________________
$
the clock setting mode.
!Alarm time display - shows the alarm time and the
English:
...PH...IL..IPS scrolls across the display continuously.
=The current clock time in the main display flashes.
=You will hear a double beep to confirm the time setting.
chosen alarm activated:
• To exit the demo mode, press any button on the
This “bolt of lightning” indi-
WARNING: TO PREVENT FIRE
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
2. Press HOUR / MINUTE to adjust the hours and
- CD
(AL 1 TIME), radio
/ buzzer
Alarm time display
2
set.
cates uninsulated material
set out in the Radio Interference Regulations of the Canadian Department of Communications.
minutes respectively.
OR SHOCK HAZARD, DO NOT
If you have set both alarms, the standby alarm time
(AL 2 TIME)
Eg. TIME / ALARM CD
within your unit may cause an elec-
Français :
/ RADIO OFF
• With your finger held down on HOUR / MINUTE, the
display will show the alarm time which is ready to go
EXPOSE THIS EQUIPMENT TO
@ALARM 2
SLEEP TIMER
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
display will increase the hours / minutes rapidly and
off first, according to the current clock time.
trical shock. For the safety of every-
RAIN OR MOISTURE.
- selects radio
/ buzzer
alarm
RADIO
E.g. if current clock time = 7:30
numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère
continuously.
one in your household, please do not
- switches radio / buzzer alarm on/ off
AL2 TIME
= 6:20
CD
des Communications du Canada.
• Press HOUR / MINUTE briefly and repeatedly to
remove product covering.
CAUTION: To prevent electric
AL 1 TIME
= 7:45,
PUSH TO OPEN
#Touch Screen Controls
3. To disconnect the set completely from the power
adjust the time slowly.
shock, match wide blade of plug to
Clock controls shown in standby mode. The radio / CD
supply, withdraw the plug from the wall outlet.
3. Press TIME SET again when you have reached the
the standby alarm display shows the alarm time, 7:45.
The “exclamation point” calls
VOLUME
wide slot, and fully insert.
CD
RADIO
TIME / ALARM
controls appear when the radio / CD is switched on.
Standby power consumption (clock mode)....1.5W
correct time.
attention to features for
GENTLE WAKE VOLUME
SET AL 1 - sets CD alarm time
which you should read the enclosed
The serial and production number are located
=You will hear a double beep to confirm the time
A sure way of getting up in the mornings, the gentle
HOUR - adjusts hour setting
setting.
literature closely to prevent operat-
SLEEP TIMER
WAKE-UP TRACK
on the bottom of the set.
wake volume for the alarm begins from a fixed gentle
CD / RADIO OFF
TIME SET - sets clock time
volume (10) and gradually increases to a maximum
ing and maintenance problems.
MAC5097
REPEAT ALARM
DAILY ALARM
MINUTE - adjusts minute setting
SETTING THE ALARM (see figure 3)
higher setting of ( 25.)
BRIGHTNESS CONTROL
RESET
SET AL 2 - sets radio / buzzer alarm
GENERAL
• The default low volume is uo : 10, and the
Two different alarm times, ALARM 1 and ALARM 2
maximum volume is uo : 25.
can be set in the CD
/ radio
/ buzzer
• During the alarm call, if you press + / - VOLUME,
modes.
the volume stops automatically getting louder.
AJ3980 CD Clock radio
NOTES
ALARM
CD
CD / RADIO
SLEEP TIMER
IMPORTANT SAFETY INSTRUCTIONS
3
PHILIPS CONSUMER ELECTRONICS
DAILY ALARM RESET
TUNING TO A STATION (see figure
Helpful Tip :
6)
Helpful Tip :
NORTH AMERICA
If you want the alarm mode to be stopped
1. Read these instructions.
12.
Use only with the cart, stand,
In the CD stop position, the CD touch screen
Manual tuning:
Knoxville, Tennessee 37914-1810, U.S.A.
If you want the alarm to wake you up, FIRST
immediately but also wish to retain the same alarm
2. Keep these instructions.
tripod, bracket, or table specified
TIME
CHECK:
setting for the following day:
display remains active for 5 minutes.
1. Press
/
briefly to find your station. Repeat
- you have disconnected the headphones.
• Press and hold DAILY ALARM RESET
• Press
to start playback again if you have
until you have found the desired station.
3. Heed all warnings.
by the manufacturer or sold with
-
radio alarm : make sure you have tuned
=You will hear a beep tone to confirm that the alarm
stopped briefly e.g. to change a CD.
Automatic tuning:
4. Follow all instructions.
the apparatus. When a cart is
properly to a station.
reset has been activated.
• Press and hold
/
until the display
5. Do not use this apparatus near water.
used, use caution when moving
– If CD playback is paused for more than 15
frequency starts to change frequency.
English
REPEAT ALARM
minutes and no controls are pressed, the set
6. Clean only with dry cloth.
the cart/apparatus combination to
SELECTING CD WAKE-UP ALARM MODE
This will repeat your alarm call at 9 minute intervals.
automatically goes to standby mode.
• When a station of sufficient strength has been
7. Do not block any ventilation openings.
avoid injury from tip-over.
found, tuning will stop. Or you can stop the
You can program and select a CD track number
• During the alarm call, press REPEAT ALARM/
SELECTING A DIFFERENT TRACK DURING PLAYBACK
Français
automatic tuning search by pressing either
Install in accordance with the manu-
13. Unplug this apparatus during lightning
between 1-99, when the set is in the standby or radio
BRIGHTNESS CONTROL.
The track number appears briefly in the display when
/
again. Repeat until you have found
playback mode.
• Repeat as often as desired.
facturer´s instructions.
storms or when unused for long periods of
PM
you press
or
to skip tracks.
However, if the track number programmed does not
= Your alarm mode indication
,
,
will
the desired station.
8. Do not install near any heat sources
time.
Español
AL 1
exist on your CD, the CD will start playback from the
flash throughout the time the repeat alarm is
• Press
once or more to skip to the next track(s).
TIME
such as radiators, heat registers, stoves, or
14. Refer all servicing to qualified service per-
PRESET
first track during the alarm call.
active.
PRESET STATIONS (see figure 6)
ALARM 1
ALARM 2
• Press
more than once to skip to previous tracks
W
1. Set the alarm time for AL1 TIME.
other apparatus (including amplifiers) that
sonnel. Servicing is required when the appara-
CANCELLING THE ALARM COMPLETELY
Storing preset stations
2. Insert a CD into the CD compartment.
When an alarm is cancelled this is shown by the
• Press
once and playback will return to the
You can program up to five radio stations for each band.
produce heat.
tus has been damaged in any way, such as
SET AL 1
HOUR
TIME SET MINUTE SET AL 2
3. Press ALARM 1 to select CD alarm mode.
selected alarm indication and symbol disappearing
beginning of the current track.
If you like, you can also replace a preset station with
9. Do not defeat the
power-supply cord or plug is damaged, liquid
4. Press WAKE-UP TRACK to activate favorite
from the display.
another frequency. The current station will be indicated
AC
track programming.
FINDING A PASSAGE WITHIN A TRACK
safety purpose of
has been spilled or objects have fallen into
To cancel the set alarm time before it goes off:
by a square round the preset number in the display.
Polarized
5. Press
or
until the desired track number
• Press ALARM 1 or ALARM 2 until the alarm icons
1. During playback, press and hold
or
E.g. 1
the polarized or
Plug
the apparatus, the apparatus has been
is shown.
/
/
disappears from the display.
=The CD is played at high speed and low volume;
grounding-type plug. A polarized plug has two
exposed to rain or moisture, does not oper-
AJ3980
1. Tune to your desired station (see RADIO
6. Press WAKE-UP TRACK to confirm the selected
the display will show 'Cd:' and your
RECEPTION).
track number.
blades with one wider than the other. A
ate normally, or has been dropped.
CD PLAYBACK (see figure 5)
current track number.
2. As soon as you have found your station, press and
= The display returns to standby clock time.
grounding type plug has two blades and a
15. Battery usage CAUTION – To prevent
1. Insert a CD with the printed side facing up, and
2. Release
or
when you recognize the
hold a preset number 1-5. Release the number
7. If you want to review your programmed track
close the door.
passage you want.
third grounding prong.The wide blade or the
battery leakage which may result in bodily
4
when you hear a double beep confirming that the
number, press WAKE-UP TRACK.
=Normal CD playback and standby clock time
2. Press the CD button to start playback.
station has now been set.
third prong are provided for your safety. If the
injury, property damage, or damage to the
CLASS 1
resumes.
IMPORTANT!
=Display shows: 'Cd: --' and the total number of
Selecting preset stations
provided plug does not fit into your outlet,
unit:
The
buzzer alarm option will automatically
tracks, then your current track number, before
RADIO RECEPTION (see figure
LASER PRODUCT
6)
• Select and press a preset number, 1-5.
consult an electrician for replacement of the
q Install all batteries correctly, + and - as
replace the CD alarm if you have:
returning to clock time
1. Press the RADIO button to switch on the radio.
– inserted a CD incorrectly;
=CD touch screen controls appears throughout CD
=
obsolete outlet.
marked on the unit.
Radio touch screen controls appears throughout
SLEEP TIMER (see figure 7)
– inserted a damaged CD;
operation.
radio operation
10. Protect the power cord from being
q Do not mix batteries (old and new or car-
– forgotten to insert any CD;
Other possible CD indications before return-
=The radio frequency and waveband appears in the
About SLEEP TIMER
walked on or pinched, particularly at plugs,
bon and alkaline, etc.).
– not closed the CD door properly.
display for 10 seconds before reverting back to the
This feature is a built-in timer device which enables
ing to clock time:
clock display.
the set to be automatically switched off during CD /
convenience receptacles, and the point where
q Remove batteries when the unit is not used
Meet Philips at the Internet
=door
SWITCHING OFF THE ALARM (see figure 4)
is shown if the CD door is not closed.
2. Press the BAND button to select your waveband
radio playback, after a set period of time. There are
=noCd is shown if no CD has been inserted /
they exit from the apparatus.
for a long time.
http://www.philips.com
There are three ways of switching off the alarm.
FM/AM.
three timer options: 60 , 30 and 15 minutes.
inserted incorrectly.
11. Only use attachments/accessories spec-
Unless you cancel the alarm completely, the DAILY
3. Tune to your station manually or automatically
Setting SLEEP TIMER
=nFCd is shown if the CD-R(W) is non-finalized
ALARM RESET option will be automatically select-
by using
=
ified by the manufacturer.
EL 6475-E004: 02/8
Err indicates a general error in operation of the set.
/
(up / down).
1. Press the SLEEP TIMER button rapidly once or
ed after 59 minutes, from the time your alarm time
more to select your timer options: 60 , 30 and 15
3. Adjust the sound with +/- VOLUME.
To improve reception :
first sounds.
minutes.
4 To interrupt, press
FM : extend the coil antenna fully at the back of the
=The display will show SL: and the timer options
Helpful Tip
set for optimum reception.
CD
briefly.
=
flashes.
AM : uses a built-in antenna. Direct the antenna by
During an alarm call/ repeat alarm, only the
=
appears when the timer is active.
5. Press
again to resume playback.
adjusting the position of your set.
DAILY ALARM RESET, REPEAT ALARM/ BRIGHT-
2. To cancel the timer, you can either press:
4. Adjust the sound using the + / - VOLUME.
NESS CONTROL and ALARM 1 or ALARM 2 and +
6. Press
to stop playback. Or press TIME /
5. To switch off the radio, press the TIME/ALARM
• TIME/ALARM
CD / RADIO OFF
/ - VOLUME controls on the set will operate.
ALARM CD / RADIO OFF to return to
CD / RADIO OFF
button.
• REPEAT ALARM/ BRIGHTNESS CONTROL
Printed in China
standby mode.
LIMITED WARRANTY
MAINTENANCE
TROUBLESHOOTING
7
PORTABLE AUDIO
NOTES
5
CD
One Year Free Exchange
General (see figure 8)
If a fault occurs, first check the points listed
Continuous crackling/ hiss disturbance during
SLEEP TIMER
This product must be carried in for an exchange.
• If you do not intend to use the set for a long time,
below before taking the set for repair.
AM broadcast
VOLUME
CD
RADIO
TIME / ALARM
withdraw the plug from the wall outlet.
If you are unable to remedy a problem by
VOLUME
– Electrical interference from TVs, computers,
WHO IS COVERED?
BEFORE REQUESTING EXCHANGE...
CD
RADIO
TIME / ALARM
• Do not expose the set, to humidity, rain, sand or
following these hints, consult your dealer or
CAUTION
fluorescent lamps, etc.
You must have proof of purchase to exchange the prod-
Please check your owner's manual for assistance. If you
SLEEP TIMER
WAKE-UP TRACK
CD / RADIO OFF
excessive heat caused by heating equipment or
service center.
Use of controls or adjustments or
uct. A sales receipt or other document showing that you
have additional questions, call us at 1-800-531-0039.
• Move set away from other electrical equipment
SLEEP TIMER
WAKE-UP TRACK
CD / RADIO OFF
direct sunlight.
performance of procedures other than
purchased the product is considered proof of purchase.
REPEAT ALARM
DAILY ALARM
BRIGHTNESS CONTROL
RESET
WARNING:
The alarm does not function
Attach it to this owner’s manual and keep both nearby.
EXCHANGING A PRODUCT IN U.S.A.,
• To clean the set, use a soft, dry cloth. Do not use
herein may result in hazardous
DAILY ALARM
PUERTO RICO, OR U.S.VIRGIN ISLANDS...
REPEAT ALARM
BRIGHTNESS CONTROL
RESET
any cleaning agents containing alcohol, ammonia,
Do not open the set as there is a risk of electric
– Alarm mode not selected
radiation exposure or other unsafe
WHAT IS COVERED?
Contact 1-800-531-0039 to arrange an exchange. Or,
benzene or abrasives as these may harm the
shock! Under no circumstances should you try
• See chapter on SETTING THE ALARM
operation.
Warranty coverage begins the day you buy your product.
ship the product, insured and freight prepaid, and with
For one year thereafter, a defective or inoperative prod-
proof of purchase enclosed, to the address listed below.
product’s surface.
to repair the set yourself, as this will invalidate
– Alarm time not set
uct will be replaced with a new, renewed or comparable
the warranty.
Philips Exchange Program
• See chapter on SETTING THE ALARM.
product at no charge to you. A replacement product is
Suite A
CD player and CD handling (see figure 9)
covered only for the original warranty period.When the
No sound
406 North Irish Street
warranty on the original product expires, the warranty
• The lens of the CD player should never be touched!
Greeneville TN 37745
on the replacement product also expires.
C D
• Sudden changes in the surrounding temperature
– Volume not adjusted
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied
can cause condensation to form and the lens of
• Adjust the VOLUME
Environmental information
WHAT IS EXCLUDED?
warranties, including implied warranties of merchantability
RADIO
F M
SLEEP
Your warranty does not cover:
and fitness for a particular purpose, are limited in duration
your CD player to cloud over. Playing a CD is then
– Headphones are connected
All unnecessary packaging material has been omit-
•
labor charges for installation or setup of the prod-
to the duration of this express warranty. But, because some
AL
2
PM
TIME
not possible. Do not attempt to clean the lens but
• Disconnect headphones
ted. We have done our utmost to make the packag-
uct, adjustment of customer controls on the prod-
states do not allow limitations on how long an implied war-
AL 1
AL 2
TIME
TIME
leave the set in a warm environment until the
ing easily separable into 2 materials: paper pulp,
uct, and installation or repair of antenna systems
ranty may last, this limitation may not apply to you.)
TUNING
PRESET
BAND
No reaction to any operation of the bottons
outside of the product.
moisture evaporates.
polyethylene.
•
product repair and/or part replacement because of
EXCHANGING A PRODUCT IN CANADA...
1
2
3
4
5
• Always shut the CD door to keep the CD
– Electrostatic discharge
Your set consists of materials which can be recycled
misuse, accident, unauthorized repair or other cause
Please contact Philips at:
compartment dust-free. To clean, dust the
• Disconnect the set from the power supply and
if disassembled by a specialized company.
not within the control of Philips.
1-800-661-6162 (French Speaking)
•
reception problems caused by signal conditions or
compartment with a soft dry cloth.
reconnect the set after 5 minutes.
Please observe local regulations on the disposal of
1-800-531-0039 (English or Spanish Speaking)
cable or antenna systems outside the unit.
• To clean the CD, wipe in a straight line from the
packing materials and old equipment.
•
a product that requires modification or adaptation to
(In Canada, this warranty is given in lieu of all other war-
6
center towards the edge using a soft, lint-free
CD playback does not work
enable it to operate in any country other than the
ranties. No other warranties are expressed or implied,
country for which it was designed, manufactured,
including any implied warranties of merchantability or fit-
8
cloth. Do not use cleaning agents as they may
– CD badly scratched or dirty
approved and/or authorized, or repair of products
ness for a particular purpose. Philips is not liable under
RADIO
damage the disc.
• Replace/ clean CD
damaged by these modifications.
any circumstances for any direct, indirect, special, inciden-
• Never write on a CD or attach any stickers to it.
VOLUME
– Laser lens steamed up
•
incidental or consequential damages resulting from
tal or consequential damages, howsoever incurred, even
the product. (Some states do not allow the exclusion
if notified of the possibility of such damages.)
CD
RADIO
TIME / ALARM
• Wait until lens has adjusted to room temperature
of incidental or consequential damages, so the above
– Laser lens dirty
exclusion may not apply to you.This includes, but is
REMEMBER...
SLEEP TIMER
WAKE-UP TRACK
CD / RADIO OFF
• Clean lens by playing a CD lens cleaning disc
not limited to, prerecorded material, whether copy-
Please record below the model and serial numbers found
righted or not copyrighted.)
on the product. Also, please fill out and mail your war-
REPEAT ALARM
DAILY ALARM
– CD-R(W) is non-finalized
•
a product used for commercial or institutional pur-
ranty registration card promptly. It will be easier for us
BRIGHTNESS CONTROL
RESET
• Use a finalized CD-R(W)
poses.
to notify you if necessary.
Occasional crackling sound during FM
WHERE IS EXCHANGE AVAILABLE?
broadcast
You may exchange the product in all countries where
MODEL #
__________________________________
the product is officially distributed by Philips. In countries
– Weak signal
where Philips does not distribute the product, the local
• Extend coil antenna fully
Philips service organization will attempt to provide a
SERIAL #
__________________________________
9
replacement product (although there may be a delay if
the appropriate product is not readily available).
RADIO
F M
X
PM
AL 2
TIME
TUNING
PRESET
BAND
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
1
2
3
4
5
Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171
EL6095T004 / 8-02