Votes - 5, Average rating: 3.8 ( )

Manafacture: Philips File size: 285.75 kb File name: aj7040d_37_dfu_eng.pdf Language of manual:

Store FM radio stations automatically You can store a maximum of 20 FM radio stations. In tuner mode, press an hold PROG for two seconds. » The clock radio stores all the available FM radio stations and broadcasts the rst available station automatically. Store FM radio stations manually 1 Tune to an FM radio station. 2 Press PROG. » The preset number begins to blink. 3 Press PRESET +/- (TUNING +/-) repeatedly to select a number. 4 Press PROG again to conrm. 5 Repeat steps 1 to 4 to store other stations. Note • To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET +/-to select a preset number. 8 EN 6 Other features Set alarm timer Set alarm In standby mode, you can set two alarms to ring at different time. Note • Make sure that you have set the clock correctly. 1 Press and hold AL1/AL2 for two seconds to activate alarm setting mode. » The hour and minute digits begin to blink. 2 Press / and / repeatedly to set the hour and minute. 3 Press AL1/AL2 to conrm. Select alarm source Note • For alarm sound, you can select buzzer, your last listened radio chanel, or latest played audio in your iPod/iPhone. Adjust AL1/2 RADIO·BUZZ·DOCK control to select alarm source for both alarms. Tip • When alarm time comes, the selected radio, buzzer, or iPod/iPhone turns on. • If iPhone is selected as alarm source, while no iPod/iPhone is connected, the clock radio switches to buzzer source instead. Activate/deactivate alarm timer 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. » The alarm icon appears if alarm timer is on and disappears if it is off. • To stop the ringing alarm, press the corresponding AL1/AL2. • The alarm repeats ringing for the next day. Snooze alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later. To adjust alarm interval (in minutes), press SNOOZE repeatedly. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 15 30 60 90 120 off Play audio from an external device You can listen to audio from an external device through this clock radio. 1 Connect the MP3 link cable to: • the MP3 LINK socket. • the headphone socket of an external device. 2 Press MP3 LINK to select MP3 link source. 3 Start to play the external device (see the user manual of this device). Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness levels. English EN 9 7 Product information Note • Product information is subject to change without prior notice. Speci cations Ampli er Rated Output Power 2 X 5W RMS Tuner Tuning Range FM: 87.5 - 108 MHz Sensitivity - Mono, 26dB S/N FM: <22 dBf Ratio Search Selectivity FM: <28 dBf Total Harmonic FM: <2% Distortion Signal to Noise Ratio FM: >55 dB General information AC Power Model: AS180-070AA250; Input: 100240 V ~ 50/60Hz0.7A; Output: DC7V 2.5A Operation Power <12 W Consumption Standby Power <2 W Consumption Dimensions - Main Unit (W x H 290 x 158 x 113 mm x D) Weight - With Packing2.08 kg - Main Unit 1.43 kg 10 EN English 8 Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (philips.com/welcome).When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Ensure that the AC power plug of the clock radio is connected properly. • Ensure that there is power at the AC outlet. No response from the clock radio • Disconnect and reconnect the AC power plug, then turn on the clock radio again. Poor radio reception • Keep the clock radio away from other electronic devices to avoid radio interference. • Fully extend and adjust the position of the FM antenna. Alarm does not work • Set the clock/alarm correctly. Clock/alarm setting erased • Power has been interrupted or the power plug has been disconnected. • Reset the clock/alarm. EN 11 9 Notice Any changes or modications made to this device that are not expressly approved byPhilips Consumer Lifestyle may void the user’s authority to operate the equipment. Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human h...

Download now

Please, enter two numbers from picture: