c. Hold the knob and carefully tighten the setscrew. d. Recheck the thermometer/pyrometer reading against the thermostat knob setting the next time the burner lights. e. Repeat steps 3.a. through 3.d. until the thermometer/pyrometer reading and knob setting agree within ± 5.F (2.C). If calibration cannot be obtained for any reason, call a Factory Authorized Service Center for assistance. 5. Remove the thermometer or pyrometer. Check Computer Magic III.5 Set Point Accuracy (This check applies onl

P.O. BOX 51000 SHREVEPORT, LOUISIANA 71135-1000 PHONE 1(318)865-1711 1 (800) 24 FRYER TABLE OF CONTENTS 1. WARRANTY STATEMENT ............................................................................................................ 1 1.1 WARRANTY PROVISIONS - HEATED LANDING ZONE ...................................................................................... 1 1.2 PARTS RETURN ...............................................................................................................

Hi-limit (left above) and air thermocouple (bottom right above) and air RTD. Transformer and fuses. Solid state relays Frymaster L.L.C., 8700 Line Avenue 71106, P.O. Box 51000, Shreveport, Louisiana 71135-1000 318-865-1711 FAX 318-862-2394 Printed in the United States Service Hotline Page 9 1-800-24-FRYER 9.3 Repair Procedures 1. Accessing the interior of the HLZ (Set up for testing): a. Disconnect power cord from outlet. b. Turn unit on its side. Remove the five access screws located on the bot