EMPIRE COMFORT SYSTEMS, INC • 918 FREEBURG AVE. • BELLEVILLE, IL 62220 B100999-1-0906 PC2CART-1, DC2CART-1 INSTALLATION INSTRUCTIONS VERIFY THAT ALL PARTS LISTED ON THE EXPLODED VIEW OF THIS MANUAL HAVE BEEN INCLUDED IN THIS CART BEFORE BEGINNING INSTALLATION. CAUTION: USE CAUTION WHEN HANDLING PARTS, AS THEY MAY CONTAIN SHARP EDGES. WORK GLOVES ARE RECOMMENDED TO PREVENT INJURY. TABLE OF CONTENTS CONGRATULATIONS! You have chosen the finest grill for your outdoor cooking pleasure. Please take ti

THIS GAS ACCESSORY IS DESIGNED FOR OUTDOOR USE ONLY IMPORTANT THIS MANUAL SHOULD BE READ THOROUGHLY BY THE PERSON INSTALLING THE GRILL MOUNTING AND ALL PERSONS WHO WILL USE AND MAINTAIN THE GRILL MOUNTING. THE INSTALLER SHOULD BE SURE THE MANUAL IS LEFT IN THE POSSESSION OF THE USER. THE USER SHOULD RETAIN THIS MANUAL FOR FUTURE REFERENCE WHEN USING OR CLEANING THE GRILL MOUNTING AND TO PROPERLY IDENTIFY ANY REPAIR PARTS THAT MAY BE REQUIRED. WARNING REFERENCE THIS MANUAL FOR PROPER INSTALLATION

B101623-2-0112 H3X SERIES PARTS LIST Index No. Part Description Part Number H3X H3XN 1 Grill Body Top (with heat indicator, hinge, B100453 B100453 1 Grill Body Top (casting only) B100456 B100456 2 Heat Indicator (stainless) B101406 B101406 3 Lid Handle (stainless) B070486 B070486 4 Foam Grip B073097 B073097 5 Warming Rack (Chrome) B100594 B100594 6 Cooking Grid (2 piece Stainless Steel) B101397 B101397 7 Briquette Bag B058122 B058122 8 Briquette Rack B101061 B101061 9 Burner Assembly B101436 B10

FIGURE 5 Shelf Kit Page 7 Pull Handle Pull Handle FIGURE 6 Place two bolts (20) into holes in pull handle (19) and through holes on left or right side of grill bottom. Fasten each bolt with a washer (21), lock washer (22), and nut (23). FIGURE 6. Repeat procedure for the right side. Part Description Qty. SKPH Part No. Handle Shelf Stainless Bracket 1 B073100 Bolt 1/4-20 x 1/2 Hex Head Stainless Steel 2 B076330 1/4-20 Hex Nut Stainless Steel 2 B076331 9/32 ID x 5/8 00 Flat Washer Stainless 2 B076

Caution: The grill and its individual shutoff valve must be disconnected from the gas supply piping system during any system pressure testing at test pressures in excess of 1/2 PSIG. Caution: The grill must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG. GAS CONVERSION TO NATURAL GAS B101623-2-0112 INFRARED COOKING General Overview Broilmaster

B100004-0-0102 IMPORTANT INFORMATION IMPORTANT INFORMATION CONGRATULATIONS! You have chosen the finest accessory for your outdoor cooking pleasure. Please take time to read this entire manual before installing your premium Broilmaster® Shelf Kit. C22 Parts Diagram...............................................................................................................................3 Parts List ................................................................................................

1. Turn knob on the grill CLOCKWISE to the OFF position. 2. Turn ON gas at the source. 3. With the grill lid open, push and turn the burner control knob COUNTERCLOCKWISE to Hi. 4. Push and hold the igniter button until the burner lights (approximately 5 seconds). 5. If a burner does not light, turn OFF all gas and refer to the Troubleshooting section of this manual. Operating Instructions Using Matches CAUTION: IF A BURNER FAILS TO LIGHT AFTER 5 SECONDS, TURN THE BURNER OFF FOR 5 MINUTES, TO ALL

However, extreme care must be used since the grill produces intense heat, which can increase accident potential. When using this appliance, basic safety practices must be followed, including the following: Read this Installation Instructions and Owner's Manual carefully and completely before using your grill to reduce the risk of fire, burn hazard or other injury. Begin by ensuring proper assembly. Do not repair or replace any part of the grill unless specifically recommended in this manual. All

Tighten Phillips screw at air shutter. 22. Replace burners into grill. Tighten two (2) Phillips screws at end of each burner. 23. Ignite burners on grill to verify burner flame characteristics. Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1. In Canada, installation shall be in accordance with CAN/CGA-B149.1 Natural Gas Installation Code, and local codes where applicable. Contact your local gas company for code regulations,