reliable service when operated within design specifica-Dangerous over pressure can result. When it is necessary to heattions. When operating this equipment, use good judg-refrigerant, use only warm (110 F [43 C]) water. ment and safety precautions to avoid damage to DO NOT REUSE disposable (nonreturnable) cylinders or attempt to equipment and property or injury to personnel. refill them. It is DANGEROUS AND ILLEGAL. When cylinder isBe sure you understand and follow the procedures and emptied, ev

PC 211 Catalog No. 531-94512-94 Form 19XL-3SS Replaces: 19XL-2SS Copyright © Carrier Corporation 1994 Safety Considerations Centrifugal liquid chillers are designed to provide safe and reliable service when operated within design specifications. When operating this equipment, use good judgement and safety precautions to avoid damage to equipment and property or injury to personnel. Be sure you understand and follow the procedures and safety precautions contained in the machine instructions as we

Carrier Transicold, Carrier Corporation, P.O. Box 4805, Syracuse, N.Y. 13221 U. S. A. Carrier Corporation 2000 D Printed in U. S. A. 0700 TABLEOFCONTENTS PARAGRAPHNUMBER Page DESCRIPTION ............................................................................... 1-1 1.1 HARDWAREANDSOFTWARE .................................................. 1-1 1.2 DataCORDER ................................................................. 1-1 1.2.1 Micro-Link2Controller/DataCORDER ..........................

Government Space Agency standards. • Microprocessor control maintains total control over chiller functions, permitting intelligent control of the refrigerant cycle. • Diagnostic module with digital display included to permit rapid troubleshooting just by pressing a button. • Electronic expansion valves (EXV) operate down to 15psig (103 kPa) pressure differential. (Ordinary thermostatic expansion valve typically requires lOOpsig [690 kPa] differential.) This reduces compressor motor power requ

30GX-900---049 (50 or 60 Hz — 230-v Control) CONTENTS Page SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Step 1 — Examine Package Contents . . . . . . . . . . . . 1 Step 2 — Install Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • REMOVE MINIMUM LOAD PORT PLUGS AND INSTALL FITTINGS • INSTALL PIP

energysavingtrust.org.uk Energy A+ Class 116 117 Cooling In-column refrigeration. SK91800-5i ‘ A+’ energy rated in-column larder fridge. AG91850-4i ‘ A+’ energy rated frost-free in-column SK91840-5i ‘ A+’ energy rated in-column refrigerator. SN91842-4i ‘ A+’ energy rated total frost-free combi SN71840-5i ‘A’ energy rated frost-free combi ¦ Electronic temperature controls with digital LED display for peace of mind ¦ Coolmatic - for the safe and efficient chilling of fresh food ¦ Printed glass she

Book 2 PC 903 Catalog No. 563-079 Printed in U.S.A. Form 30GN-3T Pg 1 7-95 Replaces: 30G-1T Tab 5c SAFETY CONSIDERATIONS Table 1 — Unit Sizes and Modular Combinations Installing, starting up, and servicing this equipment can be hazardous due to system pressures, electrical components, and equipment location (roof, elevated structures, etc.). Only trained, qualified installers and service mechanics should install, start up, and service this equipment. When working on this equipment, observe preca

l-4 Generat ..................................... 1 Features ..................................... 2 . PROCESSOR MODULE ................... 2 l• LOW-VOLTAGE RELAY MODULE ......... 2 . EXV (ELECTRONK EXPANSION VALVE) DRIVER MODULE ............... 2 . KEYBOARD AND DISPLAY MODULE ..... 2 . ELECTRONIC EXPANSION VALVE ........ 3 l• THERMISTORS ........................... 3 . CAPAClTY CONTROL .................... 3 CONTROL SEQUENCE ..................... 4,5 Off Cycle...................................

. . . . . . . . . . . . . . . . . . . . . 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ABBREVIATIONS AND EXPLANATIONS . . . . . . . . . . 1 PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CHILLER SOFTWARE VERSION REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1,2 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Equipment Needed. . . . . . . . . . . . . . . . . . . . . .

After cleaning, reconnect the equipment to the mains supply. Defrosting of the refrigerator Defrosting of the fridge compartment is automatic. The water that forms flows into a recipient on the compressor and evaporates. This recipient cannot be removed. Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. 16 16 What to do if…