The longest storage time is obtained by placing the ice pack on the food in the top compartment. The ice packs can also be used to cool food temporarily, e.g. in acold bag. Switching off and disconnecting the appliance Switching off the appliance Fig. 1 Press the On/ Off button 9. Refrigerating unit and light switch off. Disconnecting the appliance If you do not use the appliance for a prolonged period: 1. Switch off the appliance. 2. Pull out mains plug or switch off fuse. 3. Clean the appliance. 4. Leave the appliance door open. Defrosting Refrigerator and “ cool-fresh” compartments While the appliance is running, condensation droplets or frost form on the rear panel of the refrigerator compartment. As the rear panel defrosts automatically, it is not necessary to remove the frost or the condensation droplets. The condensation runs through the condensation channel and the drainage hole to the evaporation pan where it evaporates. Note Keep the condensation channel and drainage hole clean, so the condensation can drain off. Fig. * Freezer compartment The fully automatic NoFrost system ensures that the freezer compartment remains free of ice. Defrosting is no longer required. en Cleaning the appliance a= Caution ¦ Do not use abrasive, chloride or acidic cleaning agents or solvents. ¦ Do not use scouring or abrasive sponges. The metallic surfaces could corrode. ¦ Never clean shelves and containers in the dishwasher. The parts may become deformed! Proceed as follows: 1. Before cleaning: Switch off the appliance. 2. Pull out mains plug or switch off fuse. 3. Take out the food and store in a cool location. Place ice pack ( if available) on the food. 4. Wait until the layer of frost has thawed. 5. Clean the appliance with a soft cloth, lukewarm water and a little pH neutral washing- up liquid. The rinsing water must not run into the light or through the drainage hole into the evaporation pan. 6. Wipe the door seal with clear water only and then wipe dry thoroughly. 7. After cleaning reconnect and switch the appliance back on. 8. Put the food back into the appliance. Notes ¦ Regularly clean the condensation channel and drainage hole, Fig. * /B, with a cotton bud to ensure that the condensation can drain. The water conduction channel, Fig. * /A, can be taken out for cleaning. ¦ After cleaning, the stopper must be reinserted into the drainage hole of the refrigerator compartment for functional reasons. Interior fittings All variable parts of the appliance can be taken out for cleaning. Taking out the glass shelf “EasyLift” Fig. 4 Move glass shelf all the way upwards and take out. Taking out the fixed glass shelf Fig. 5 Press buttons on the underside and detach from the fixing. Taking out the door shelf “ EasyLift” Fig. 6 Move door shelf all the way upwards and take out. Taking out the butter and cheese compartment Fig. 8 To clean the compartment, lift it at the bottom and take out. Taking out the frozen food container Fig. + Pull out the frozen food container all the way, lift at the front and remove. Note Before inserting the frozen food container with telescopic rails, remove the latter. en Removing the container Fig. Tilt container forwards and take out. To insert the container, place the front of the container on the telescopic rails and push into the appliance. The container is engaged by pushing it into the appliance. Taking out the humidity filter Fig. 1/21 The humidity filter over the humidity container can be taken out for cleaning. To do this, first take out the humidity container and pull out the humidity filter. Lift off the filter cover, Fig. , , and take out the filter. Clean in lukewarm water, leave to dry and re- assemble. Remove telescopic rails Fig. . 1. Pull out the telescopic rail. 2. Push lock in the direction of the arrow. 3. Detach telescopic rail from the rear pin. 4. Push telescopic rail together, push backwards above the rear pin and disengage. Installing telescopic rails 1. Place the extended telescopic rail on the front pin. 2. Pull the telescopic rail forwards slightly until it engages. 3. Place telescopic rail on the rear pin. 4. Push lock backwards. Odours If you experience unpleasant odours: 1. Switch off the appliance with the On/ Off button. Fig. 1/9. 2. Take all food out of the appliance. 3. Clean interior ( see chapter “ Cleaning the appliance”) . 4. Clean all packages. 5. Seal strong smelling food in order to avoid odours from forming. 6. Switch the appliance on again. 7. Store food in the appliance. 8. Check whether the formation of odours is still occuring after 24 hours. 9. Change odour filter, Fig. / . The odour filter is situated behind the upper “ cool-fresh” container. Replacement filters are available from your customer service. Light ( LED) Your appliance features a maintenance- free LED light. These lights may be repaired by customer service or authorised technicians only. en Tips for saving energy Operating noises ¦ Install the appliance in a dry, well ventilated room! ...

Other models in this manual:
Refrigerators - K8345X0/02 (1.73 mb)
Refrigerators - K8345X0/03 (1.73 mb)
Refrigerators - K8345X0/04 (1.73 mb)
Refrigerators - K8345X0/05 (1.73 mb)