Votes - 0, Average rating: 0
(
)
)
|
manual abstract
The delivery consists of the following parts: ¦ Built-under appliance ¦ Interior fittings ( depending on model) ¦ Bag containing installation materials ¦ Operating instructions ¦ Installation manual ¦ Customer service booklet ¦ Warranty enclosure ¦ Information on the energy consumption and noises Observe ambient temperature and ventilation Ambient temperature The appliance is designed for a specific climate class. Depending on the climate class, the appliance can be operated at the following temperatures. The climate class can be found on the rating plate. Fig. 9 Climate class Permitted ambient tempera ture SN +10 °C to 32 ° C N +16 °C to 32 ° C ST +16 °C to 38 ° C T +16 °C to 43 ° C Note The appliance is fully functional within the room temperature limits of the indicated climatic class. If an appliance of climatic class SN is operated at colder room temperatures, the appliance will not be damaged up to a temperature of +5 °C. en Ventilation The refrigeration unit is ventilated only via the ventilation grille in the base. Never cover the ventilation grille or place anything in front of it. Otherwise the refrigeration unit must work harder, increasing the power consumption. Installation location Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to direct sunlight nor near a heat source, e. g. a cooker, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances to a heat source: ¦ 3 cm to electric or gas cookers. ¦ 30 cm to an oil or coal- fired cooker. Connecting the appliance After installing the appliance, wait at least 1 hour until the appliance is switched on. During transportation the oil in the compressor may have flowed into the refrigeration system. Before switching on the appliance for the first time, clean the interior of the appliance ( see chapter “ Cleaning the appliance”) . Electrical connection The socket must be near the appliance and also freely accessible following installation of the appliance. The appliance complies with the protection class I. Connect the appliance to 220–240 V/50 Hz alternating current via a correctly installed socket with protective conductor. The socket must be fused with a 10 to 16 A fuse. For appliances operated in non- European countries, check whether the stated voltage and current type match the values of your mains supply. This information can be found on the rating plate. Fig. 9 Getting to know your appliance Please fold out the illustrated last page. These operating instructions refer to several models. The features of the models may vary. The diagrams may differ. Fig. 1 1- 5 Controls 6 Freezer shelf 7 Frozen food container 8 Ventilation opening en Controls Fig. 2 1 Temperature controller Is used to set the freezer compartment temperature. 2 On/Off button Serves to switch the whole appliance on and off. 3 “super” button Switches super freezing on and off. Illuminates when super freezing is on. 4 Alarm button Used to switch off the warning signal, see chapter “ Alarm function”. 5 Alarm display Lights up if the freezer compartment becomes too warm. It goes out when the freezer compartment has reached the set temperature. Switching the appliance on Fig. 2 Press the On/ Off button 2, the button is lit. The temperature alarm is switched off by pressing the alarm button 4. The alarm display 5 lights up until the appliance has reached the set temperatures. We recommend the medium setting. Operating tips ¦ The sides of the housing are sometimes heated slightly. This prevents condensation in the area of the door seal. ¦ If the freezer compartment door cannot be immediately re-opened after it has been closed, wait until the resulting low pressure has equalised. ¦ The refrigeration system may cause several areas of the freezer shelves to frost quickly. This does not affect function or power consumption. The appliance does not require defrosting until the entire surface of the freezer shelf is covered with more than 5 mm of frost or ice. Setting the temperature Fig. 2 Set the temperature controller 1 to a number with a coin. The higher the number, the lower the temperature. Alarm function Temperature alarm The temperature alarm switches on if the freezer compartment is too warm and the frozen food is at risk of thawing. The alarm may switch on without any risk to the frozen food: ¦ when the appliance is switched on, ¦ when large quantities of fresh food are placed in the appliance, ¦ if the freezer compartment door is open too long. en Note Do not refreeze thawing or thawed food. Only ready meals ( boiled or fried) may be refrozen. No longer store the frozen produce for the max. storage period. Alarm display Fig. 2 The alarm display 5 lights up if the freezer compartment becomes too warm. Frozen food is at risk of thawing. Switching off the alarm Fig. 2 Press the alarm button 4 to switch off the warning signal. Usable capacity Infor...
Other models in this manual:Refrigerators - GU15DA50NE/03 (2.23 mb)
Refrigerators - GU15DA55/05 (2.23 mb)